-
Anonymous users2024-01-24This is more difficult, it is recommended to consult a professional waterproof construction company.
-
Anonymous users2024-01-23The selection of floor heating pipes is not good, it is recommended to find an HVAC company.
-
Anonymous users2024-01-22Find a professional underfloor heating company to solve it for you.
-
Anonymous users2024-01-21The first situation - you repair the floor heating only damage the waterproof layer, the bottom layer of the waterproof layer is not damaged, you should follow the following steps: remove the damage and increase the surrounding area by at least 100mm, and clean up the floating dust, two-component polyurethane waterproof coating 1 cloth can be coated three times, the cloth is glass mesh cloth;
In the second case, the base layer has been damaged, go to the building materials store, buy something like Jintang no leakage or plugging spirit, repair the damaged base layer, and then deal with it according to the above.
-
Anonymous users2024-01-20If it has been backfilled, it is recommended that you do it according to the third floor, if it has not been backfilled, it is recommended that you do it according to the second floor.
-
Anonymous users2024-01-19After installing the new underfloor heating pipes, clean them up. Then re-waterproofing the new underfloor heating pipes, preferably three times.
-
Anonymous users2024-01-18If it's not a big problem, pay attention to it when you usually use water, and try not to sprinkle water outside the bathtub.
-
Anonymous users2024-01-17Clean the surroundings, and after drying, fill the waterproof material that can be brushed on the surface of the gap with the plugging king, and then brush it a few times.
Do two layers of waterproofing, do it once before the floor heating, and do it again after the floor heating leveling.
It's easy to do, use Guoerjia acrylic waterproof coating, combined with reinforced polyester cloth, and adopt three coats and one cloth construction process to ensure that your leaking place will not have any more problems in your lifetime.
It depends on how long the tubing is and the temperature of the inlet water to determine whether the return water will get cooler at the end. If the pipe is within 70 meters, the water temperature is more than 50 degrees, and the end return water temperature is also about 45 degrees, which is not cool at all. However, when the pipeline reaches 90-100 meters, the water inlet is more than 40 degrees, and the end backwater is less than 30 degrees, which is a little cool.
It is not a floor heating pipe, it should be a hot and cold water pipe connected together, not broken, you can fix it according to your own needs, plus the valve, and the pipe is also broken as needed.
When making a cloakroom, pay attention to protect the floor of the original bathroom and do not break the floor heating pipe. >>>More