How to construct furniture paper

Shanghai Panda Home Decoration reminds you:

Generally, it is pasted with a flat surface with a cold press or appropriate hot pressing, and a vacuum laminating machine is used for curved surfaces! The principle is (using the pressure difference between vacuum and the outside world to extrude, the flat surface of the vacuum laminator can be pasted). >>>More

Apply putty, scrape primer, sand, clean.

Water-based wood paint includes wood decoration paint, furniture paint and floor paint three major products, water-based wood paint, only semi-finished products, must go through a construction process, until the substrate is formed and the decorative effect is produced, can become a finished product. The ideal decorative effect not only depends on the excellent performance of the water-based wood paint itself, but also on the reasonable product supporting construction, excellent construction technology, and standardized operation under appropriate environmental conditions. At the same time, good substrate treatment, strict construction and control are the guarantee to achieve high-quality projects. >>>More

First of all, the surface of the bookcase must be dry, then sanded and smoothed with sandpaper, and if necessary, the holes should be filled with putty. Handmade veneers are mainly made of white latex or all-purpose adhesive. Apply the glue evenly on the surface of the board, then cover the wood grain paper, be careful not to let air bubbles in, and finally scrape off the extruded glue on the edge of the board with a knife.

1. Where the safety fence appliances and construction equipment and machinery entering the construction site shall be subject to the acceptance or permit system, and the safety protection of high-rise buildings without receiving the acceptance notice or permit shall not be used. >>>More

You need to understand the structural drawing of the furniture before you can draw the construction drawing of the furniture.