600600 gypsum board light steel keel ceiling how much is a square meter

Updated on Suspended ceilings 2024-10-03
2 answers
  1. Anonymous users2024-01-24

    Take a look at your room layout. After all, there are still construction difficulties. It won't be very expensive, though.

  2. Anonymous users2024-01-23

    What kind of floor if there is no can be added.

Related questions
4 answers2024-10-03

Hello, depending on which city you are in, you can decide the price per square meter. >>>More

2 answers2024-10-03

It depends on whether you hang a flat top or a styling roof. Look if you want to hang double-layer gypsum board, then I will tell you according to the price of the flat top, the single-layer gypsum board ceiling is about 80 yuan square, the price of each place is different, and then add a layer of gypsum board 20 yuan square to the top, because a gypsum board is square, the price is twenty or thirty yuan, and send you a little advice: the screw used in the ceiling must be used 8-10mm, not 6mm.

5 answers2024-10-03

The floor tiles are wiped clean, and the bottom of the partition is directly stood on the floor tiles with glass glue, which is very firm. Fill the gap with foam glue first, then flatten it, glue paper tape, and spray latex of the same color. If the partition is large, it can be reinforced with a few steel nails on the side wall façade.

3 answers2024-10-03

Are you asking whether a light steel keel ceiling or a wooden keel ceiling is better? Personally, I think that it is better to improve the home or the wooden keel, and the light steel keel that is mandatory in public places.

1 answers2024-10-03

The spacing of the main keel is generally between 80 120 cm, depending on how thick the gypsum board is used, if the gypsum board is thick, or it is a double-layer gypsum board, the spacing of the main keel should be small, otherwise it can be appropriately enlarged, but can not exceed meters; The spacing of the suspension bar is also the same, and the distance between the suspension bar and the suspension bar can be determined according to the size of the main keel, but the same can not exceed the meter; The spacing of the secondary keel (50 keels) is 30 cm when gypsum board is generally used, and if the thickness of the gypsum board is 12mm, the spacing of the secondary keel can be enlarged to 40 cm. But in our case, we basically use 30 cm spacing. >>>More