-
Anonymous users2024-01-24You can use a professional machine to heat the plate and bend it directly.
It is also possible that the complete part is put together in small pieces, and then the outside is covered with a layer of veneer and it is not visible.
A small amount of MEIBOSS wood antifungal agent can be added to the raw materials of panel furniture, which can be brushed or soaked to absorb a certain amount of wood antifungal agent, and then air-dried to obtain a good anti-mildew effect, so that the surface of the board can be mildew and antibacterial for a long time.
Generally, there are two ways to circle an arc.
The first is to use a low-temperature fire to bake and deform, which was more commonly used in rural areas in the past. >>>More
Generally, there are two ways to circle an arc.
The first is to use a low-temperature fire to bake and deform, which was more commonly used in rural areas in the past. >>>More
1. If it is a shape tool, once it is drawn, the number modification may not be adjusted, but you can use the following controllable method: select the conversion point tool, select the two anchor points of the rounded rectangle (one corner), and then Ctrl+T to transform it freely, hold down the Shift key to scale it proportionally, and you can adjust the curvature of the rounded corner very casually. The same goes for paths. >>>More
Panel furniture cutting is divided into two ways: manual sliding table saw cutting and CNC equipment cutting. CNC blanking equipment is divided into two categories: electronic saws and engraving machines, electronic saws can only cut materials, but can be overlapped with multiple boards, suitable for mass production; The engraving machine can only place a single board, but it can complete drilling, grooving and milling at the same time, which is suitable for customized production.