The drainage pipe of the bathroom is an inclined pipe, how to set the pipe elevation of the connecti

There should be on the sample drawing, if there is really not, then there are two ways, 1, if there is just no distance from the wall, then the sitting can be positioned by 400mm from the wall, the sewage pipe and the main riser are positioned by 100mm from the wall, and the floor drain can also be positioned by 100mm, 2, if there is no positioning size, it is recommended that you go to the supervision, which is a drawing problem, no matter what the situation should be communicated with the supervisor, so that the problem can be solved and not responsible.

First of all, there is no way to solve the problem of trouser combustion without a fuser that can hold the temperature. First of all, there must be a fuser that can hold the temperature, and then buy PE inner smile pure large wire joint and PVC outer wire joint. I can't upload pictures vertically on this page, and I'll give you additional pictures when I get back.

In modern home decoration, the bathroom is not only a place to wash off the dust, but also a place to relax the nerves and rejuvenate the floor. Therefore, instead of thinking of the bathroom as the most unclean part of the room, as in the past, it should be carefully planned. Today I will tell you how to install the bathroom drain. >>>More

Be sure to do a good job of drainage. 1. The water pipe is a hidden project, and the size of the water pipe must be considered more comprehensively when arranging the size of the water pipe, or it is not easy to use in the later stage, and it is more troublesome to maintain. Toilet drain pipe size: The inner diameter of the sewer pipe is 100mm to 3000mm, and the length is 30mm to 200mm. >>>More

Drainage pipe PVC, because the drainage is garbage water, just use PVC directly, PPR heating or tap water, non-toxic and environmentally friendly.