-
Merlan Gerland 10A
1500W less than about 7A without overload.
It should be that the wiring is not good, check the wiring and tighten the point.
-
It should be caused by the bad contact of the circuit breaker and the heating and smoke, please check whether the crimping line is normal, find a screwdriver to tighten the crimping screws well when the main gate power is stopped, if it is normal, please find an electrician to solve it.
-
This air opening is a capacity of 10A without leakage protection, only an air opening with overcurrent protection, and a 16A air opening should be selected for household kitchens. Lighting is below 6A.
-
Maybe the overcurrent protection device of the circuit breaker is broken, and this circuit breaker does not have leakage protection, only overcurrent protection.
The empty opening of the living room socket line tripped! You look at which one jumps behind the main switch, remember which is the living room power switch, and then push the main switch and it up without jumping, which means that the kettle is caused by a short circuit! If you can't push it, it means that there is a short circuit on the line.
It's not normal, you have to find someone to take a look, it is estimated that it is missed, be careful of danger.
No problem, the floor tiles are all fired at more than 1200 degrees.
It mainly depends on whether you have enough space in your kitchen. >>>More
This probability is very small, depending on how many switches you have between the kitchen switch and the whole building, and how much current each switch is rated at