Can I put plastic flooring on the hardwood floor of a dance studio?

Updated on Solid wood 2024-10-01
4 answers
  1. Anonymous users2024-01-24

    Hello! "Solid Wood Floor" can be completely paved with [plastic flooring]!

    1: At present, the 5-meter by 5-meter "tooth butt" plastic flooring produced by the new technology is very, very! And all kinds of colors are available! The price is reasonable!

    2: Plastic synthetic pulp seamless flooring! The site is now processed and paved. The quality is the same as above! But the cost is too much! Equal to twice as much! Very, very unnecessary!

    According to the [rhyme] requirements of the special dancers at the foot of the dance: "plastic flooring" is very unsuitable for the foot skills requirements of the [dance rhyme slide] under the feet of the dance! Because the plastic floor is [astringent]!

    From our country and the world's famous professional dance [hall] the floor is basically [solid wood floor] paving! Some are paved with "terrazzo and tiles" and can also be "set aside"! Do you need to think carefully?

    A space for music and dance lovers from "Rhyme: YUNSHENGYINXIANG"!

    Thank you for your classic question.

  2. Anonymous users2024-01-23

    If you want to pave it, there's nothing you can't do.

  3. Anonymous users2024-01-22

    Yes, lay the special floor glue for dance.

    Dance card dance special floor glue.

  4. Anonymous users2024-01-21

    Need dance studio floor glue contact me directly.

    HUMEI specializes in the production of special floor glue for dance studios.

Related questions
1 answers2024-10-01

1. The temperature is low in autumn and winter, especially in the northern region. After the wooden floor is transported to the pavement site by long-distance transportation, it should not be opened and paved immediately, because the temperature of the floor itself is low at this time, and the indoor temperature is relatively high, if the package is opened, the floor will appear condensation, which is easy to cause deformation, and should be placed for more than 24 hours, so that the floor can adapt to the surrounding environment before opening the package. >>>More

2 answers2024-10-01

If the spacing between the wooden keels is 303mm, it should be matched with the floor with a length of 910, and the interface should be on the keel - the wooden floors are tongued and grooved on all sides, even if they are not on the keel, it doesn't matter (in this case, it is generally just a partial seam). >>>More

4 answers2024-10-01

It can be paved, but do not use ordinary plastic flooring, it is best to use membranes, and the surface should have a concave and convex non-slip texture, and the glue should use two-component waterproof glue, which is more strict on the construction. PVC plastic flooring has incomparable advantages in high-rise buildings for building load-bearing and space saving. At the same time, it also has special advantages in the renovation of old buildings. >>>More

2 answers2024-10-01

The "double standard" of floor pavement was officially implemented, and the national standard "Code for Acceptance and Use of Wooden Floor Pavement" GB T20238-2006 and the Ministry of Construction's "Technical Regulations for Wooden Floor Pavement Engineering" (CECS191: 2005) were launched at the same time, which will make the pavement quality have rules to follow. For the new wood floor paving standard, consumers are provided with 9 simple methods to check whether the wood floor pavement is qualified. >>>More

2 answers2024-10-01

Solid wood flooring will not specify to lay keel, and it is also possible to make a large core board bottom. The keel is laid only to better achieve the purpose of moisture prevention and insect prevention. Avoid the floor from bursting after being squeezed after heat expansion and cold contraction. >>>More