What to do if the water level in the toilet is too high?

Updated on Toilet 2024-10-01
6 answers
  1. Anonymous users2024-01-24

    Is it the water level with a location? If it is the water level of the water tank, adjust the height of the float of the water tank, if it is the water level of the reverse water bend, there is no way, the design is so.

  2. Anonymous users2024-01-23

    Too high will waste water. According to your own usage situation. to adjust it.

    Now there are several of them. There is usually a float in the tank or something.

    Remove the middle drawstring and you're good to go.

  3. Anonymous users2024-01-22

    That can also be adjusted, just adjust it to a certain position.

  4. Anonymous users2024-01-21

    It would be nice to reduce the amount of displacement...

  5. Anonymous users2024-01-20

    Adjust the float, the lower the float is adjusted, the lower the water level.

  6. Anonymous users2024-01-19

    The rib bones were poured into the toilet bowl and clogged. What can be done to dredge it?

Related questions
7 answers2024-10-01

The water in the toilet tank is used to flush the toilet. When the flush toilet is not cleaned when flushed, the water level of the toilet tank should be raised. If you feel the need to conserve water, you can choose to lower the water level. >>>More

3 answers2024-10-01

If the balcony cement wall is too high.

If the property agrees, it will be demolished by a plasterer, and the steel railing will be made without embroidery, and the vision will be good. >>>More

4 answers2024-10-01

Or maybe I'm overthinking or self-righteous.

But I couldn't help it. >>>More

1 answers2024-10-01

Make a slope from the bathroom to connect with the bedroom, the slope is about 1:10, and the material is roughly the same as the bedroom material. After it is done, it will neither affect the aesthetics nor hinder the use, which is only a partial rework. >>>More

2 answers2024-10-01

Can do to the ceiling, meters is the height of the normal commercial toilet of the house, if it is a villa bathroom also has a high meter, the original top of the bathroom, there will generally be upstairs with sewage pipes and drainage pipes, the height of the ceiling will be restricted by these pipes, so basically it is impossible to do too high. Due to the need to consider winter heating, the higher the top surface, it is difficult to reach the required temperature, so the top surface of the bathroom in ordinary apartments is generally not too high, usually floating up and down at 2300mm, but generally not lower than 2200mm, and the height will not exceed 2500mm.