Is it okay to leave 2 3 meters between the width of the bed and 2 meters in the length of the bed an

OK. The installation position of the switch is also particular, and improper installation may cause trouble in the future use.

The installation height of the switch is generally meters above the ground, and at the same height, and the difference cannot exceed 5mm;

The switch next to the door is generally installed on the right side of the door, and cannot be behind the door;

Several switches are installed side by side or multi-position switches, and the position of the control appliance should correspond to the position of each switch functional component, such as the leftmost switch should control the relative leftmost electrical appliance;

Necessary switches can be installed at a height of meters above the desk and bedside table against the wall, so that users can control indoor electrical appliances without getting up;

Kitchens, bathrooms, terraces, switches should be installed as close as possible to areas with water. If close, when adding a splashproof box to an outlet.

The width of the bed is 2 meters, the length of the bed, and the distance between the switches at the head of the bed is left in meters, which is completely OK and is a normal standard.

Slightly narrower, the bed is 2 meters wide, and it is recommended that the switches on both sides are recorded in more appropriate. Because some of the bedside will be thick, generally around 10-40cm, if the sides are too narrow, it is inconvenient to reach out and turn off the light.