How high should the bathroom be waterproof?

Updated on Bathroom 2024-10-06
4 answers
  1. Anonymous users2024-01-24

    Bathroom waterproof construction height: 30CM up to the corner of the wall, 180CM height at the shower, 100CM at the basin.

    Pay attention to the last time the wall waterproofing and floor waterproofing are done (a total of 2 layers need to be done), and do not leave construction joints in the corners of the wall (that is, do construction pauses and intervals).

    Hope this helps LZ somewhat.

  2. Anonymous users2024-01-23

    30 cm on the wall, the shower faucet is made meters high.

  3. Anonymous users2024-01-22

    The height is determined according to the need, generally speaking, the bathroom is waterproof 180 cm high, and the non-shower wall waterproof coating cannot be less than 35 cm in principle. However, in order to strengthen the waterproof effect, it is recommended to achieve a uniform height of 180 cm. In addition, for the light wall of the toilet and bathroom renovation and the self-built light wall, it is recommended that the waterproof height should be at the top.

    Waterproofing paint must be brushed to the millimeter thickness of the national acceptance specification.

  4. Anonymous users2024-01-21

    The waterproof layer of the Yinon toilet should pay attention to the problem.

    1. Waterproof coatings should be selected from regular manufacturers.

    2. Before waterproof construction, the ground should be cleaned, and the base layer ready to be waterproof must be cleaned, and the surface should be kept dry as much as possible, and there should be no sand and other debris.

    3. The number of layers of waterproof coating should be at least 2 layers. The construction is carried out according to the process requirements of the waterproof material. It should be noted here that the leakage parts of the bathroom are mainly at the root of the upper and lower water pipes and the foot of the wall, so when these places are waterproofed, it must be "full", and its practical fingers can be hooked.

    4. The waterproof height of the bathroom should be higher than the meter.

    5. The waterproof coating should be dried in the shade.

    6. If a certain wall of the bathroom is a light wall, it is necessary to waterproof the whole wall.

    7. After the waterproof material is dry, it is necessary to conduct a 24-hour closed water test to observe whether there is any water leakage. After doing this, there will generally be no water leakage.

Related questions
How high should the waterproofing of the bathroom be?
9 answers2024-10-06

Due to the large amount of water used in the bathroom, a waterproof layer is required for this purpose. How high is the bathroom waterproof? PChouse will take you to find out. >>>More

How high should the waterproof height of the bathroom wall be?
1 answers2024-10-06

Generally, the wall is 30-50 cm, and the shower area should not be less than 180 cm. Of course, the higher you do, the better!

How high should the wall waterproofing of the home improvement bathroom be? In the shower room?
3 answers2024-10-06

The bathroom is waterproof at least meters high, and the shower room is the same.

How high should the waterproofing of the washbasin in the bathroom be?
2 answers2024-10-06

To make the wall in contact with the washbasin in the bathroom waterproof, it needs to be painted from the floor all the way to 300mm above the washbasin.

How high should the bathroom be waterproofed, three walls are made of one meter eight or only one wa
3 answers2024-10-06

It is recommended that all four walls be made of meters, which refers to a form of waterproof material relative to rigid waterproof materials such as waterproof mortar and waterproof concrete, and includes two types of waterproof coating film and waterproof membrane in the form of attachment to the base layer.