How to fill floor tiles and wooden floors in living rooms and bedrooms in CAD

Updated on Living room 2024-10-01
1 answers
  1. Anonymous users2024-01-24

    Command --H--- under the border (add: pick point) -- click on a closed box --- space --- example (select a ground rotation or wooden floor) -- adjust the scale in the angle and proportion--- preview --- space -- click OK if appropriate.

Related questions
How to fill floor tiles and wooden floors in living rooms and bedrooms in CAD Why wait a long time t
4 answers2024-10-01

If you are finishing the furniture and then filling, it is best to use a line to roughly trace the furniture and then fill it, it should not be very slow!

How can CAD fills not be filled into furniture, there is no way to always have a disconnect in the d
3 answers2024-10-01

It's the standard I don't know.,Our company is to hide the furniture.,The layer where the door is located.,Only the wall is left.,Refill.。。。 >>>More

The thickness of the walls in the bedroom and bathroom on the right in CAD is calculated at 250 in t
1 answers2024-10-01

According to the specifications of architectural drawing, the general dimensioning is based on the center line of the wall.

How to clean and maintain the living room floor mat What material is good for the living room floor
1 answers2024-10-01

The type of material of the living room mat.

1. Cotton is a material that people are most exposed to in daily life, if it is 100% cotton, coupled with anti-slip particles, not only the dust removal effect is good, but also can increase the friction between the ground and the ground, the anti-slip effect is very strong, in addition, the cotton mat feels comfortable and mild, so that our life returns to the simple. >>>More

How to distinguish the living room from the bedroom
3 answers2024-10-01

You can make a mark on the switch, so that you can distinguish the switch in the living room and bedroom.