What is the reason why the toilet is not strong

Hello: I don't know how long you have been using this toilet, whether it was weak when you first bought it or when it was a long time later. If this is the case at the beginning, it is estimated that you have bought a siphon toilet, and it has been displaced because the hole spacing is not suitable; Or there are two reverse bends, one for the toilet and one for the sewer pipe.

If it is because it is a long time later, one is that the sewer pipe is not good and may be blocked; One is that there is dirt inside the water tank and needs to be cleaned; Another possibility is that the pipes are not glazed and the pipes are clogged due to long-term fouling. If it is within the warranty period, it is recommended to find the manufacturer to test it and solve it according to the actual situation.

After the toilet is used for a long time, a lot of pollutants will accumulate on the inside of the sewer pipe, resulting in slow toilet drainage.

First of all, clean the toilet bowl and drain the water in the tank (suck it out with a rag again and again, wring it out) to avoid dilution after pouring hydrochloric acid.

Pour the whole bottle of dilute hydrochloric acid (about 500ml) into the toilet sink, do not dilute with water, the pure descaling effect is good, and the ceramics will not be damaged. At this time, you will find that the acid enters the tank and reacts with the scale, turning up the bubbles, so after adding the acid, you should use a waste rag to plug the groove, so that the bubbles generated by the acid will turn down as much as possible, so that the scale inside the siphon pipeline will be cleaned more cleanly. At first, there will be some smoke and strong smell, so it is recommended to turn on the exhaust fan.

Wait for half an hour, clean the scale, and then flush, the toilet drain is smooth and powerful!

See if the water is blocked or if there is a problem with the button.