What should I do if the floor drain in the bathroom is not drained?

Updated on Bathroom 2024-10-05
2 answers
  1. Anonymous users2024-01-24

    This structure is designed to prevent drain odors from entering the restroom, but at the same time it also makes the drain extremely slow.

    1) Opening 2 to 3 openings about 5mm wide on the isolation cover can make the water flow smooth, and of course, the effect of odor isolation is also much reduced.

    2) Polishing off the lower edge of the isolation cover by 1-5mm in a week, don't polish too much at once, first 1mm, if not, then 1mm, polish little by little, once the water is smooth, don't polish again.

  2. Anonymous users2024-01-23

    It is estimated that the drain pipe is thin and caused by too much hair falling. The floor drain is composed of several parts, you can take it apart to clean it, or flush it directly with a water hose, but don't poke it with a hard object, be careful to break the drain.

Related questions
2 answers2024-10-05

As long as the sewer pipe is sealed next to the waterproof, no problem! >>>More

4 answers2024-10-05

The floor drain drain has a device that makes the odor not reverse, and it is generally the way to store water in the floor drain bowl, which is called a water seal. The washing machine can be drained temporarily, and it will be restored after washing. If there is a water seal on the drain, it is possible. >>>More

5 answers2024-10-05

What are the main causes of water leaks in the bathroom? How to fix a leak in the bathroom?

1 answers2024-10-05

If you want to be simple, ask the decoration workers to come and help deal with it, and if you don't feel too troublesome, you can mop the floor every day.

1 answers2024-10-05

Are you going to prepare a transverse pipe This is not good Choose a floor drain to choose Jindel floor drain Jindel floor drain panel water area of more than 2800 square millimeters, plus a unique siphon function, to ensure that the drainage volume can reach up to 80L min under normal conditions, which is much greater than the municipal tap water pressure, 6 points of pipe burst flow. The height of the water seal reaches the national requirement of 5cm, and the water storage capacity of the water seal exceeds 300ml, which can ensure that it does not dry up for 30 days.