-
Anonymous users2024-01-24For the most high-end one-piece toilet, the heating pipe should be on the lower part of the toilet tank or on the lid of the tank, of course, not inside the tank; There is also a kind of separation from the toilet, that is, it can be combined, and the one is in the gasket of the toilet.
-
Anonymous users2024-01-23The regenerative type generally has a larger flow rate than the instantaneous flushing type, and can also be adjusted with water pressure.
Instantaneous type has a direct impact on the water temperature, so it is rare and difficult to make a function with water pressure regulation.
There are many mainstream bidets in Japan and South Korea, and there are also a small number of instantaneous ones, but they are more expensive, which is due to the higher cost of the real instantaneous type.
Many cheap instantaneous machines in China can only be regarded as this.
Rapid heating type, the simple way to distinguish is to see whether there is a water outlet at the bottom of the machine, there is a water tank or water container with a water outlet, and there is a heated water storage after each use.
A real instantaneous machine does not have any water container inside, but only relies on a small instantaneous heating tube with a precise temperature and a protective private service circuit to heat the water flowing through it, which is similar to an electric kettle with a water tank.
The simple heating method is safer, because once the instantaneous heating pipe is broken and leaks, the water will also be instantly sprayed out and burned out of the heating pipe, resulting in visible fault phenomena and stop using it, but the old-fashioned heating pipe leaks electricity in the water, it is not suitable.
Be detected, unless you are electrocuted. Of course, this is an extreme failure prediction, and the machine in normal life is still relatively safe, but at the end of life, it is still not as safe as a regenerative machine.
Generally speaking, in terms of water saving and safety performance, it is better to store heat.
What do you mean by that heating pipe kitchen? The heating pipe can be sprinkled anywhere in the fish tank, and the water can be filtered to make the water flow, and the heat can be transferred to the whole fish tank. The fish tank should be placed in the living room to gather wealth?
The heating tube of the commercial kitchen steamer, no matter which manufacturer, as long as the heating tube produced by him can be used, because this kind of heating pipe is directly in the water as the clock, not dry boiling, so it can be used.
It must be in the upper middle position, huh? The float is mainly used to control the height of the water consumption of the water tank.
It depends on what function of the toilet you need, if it is a toilet with a cleaning function, it is recommended that you use a toilet without a water tank, which is more hygienic, because the water stored in the water tank will have bacteria for a long time, and it is unhygienic to the body when cleaning; If you don't need a smart toilet with cleaning function, it is recommended to choose a smart toilet with a water tank, simple, no need to maintain, if you choose no water tank, you need to be electrified, and you can't flush mechanically when the power goes out, you can only pour water to flush; If you plan to buy a smart toilet lid in the future and install it, then you still choose a general non-water tank, which is convenient for you to install a smart toilet lid in the future You ask the smart toilet cover here to choose no water tank or a water tank, since it is a smart toilet cover, it is necessary to install a smart cover, of course, it is better to choose a no water tank.
That is, the seat is kept at a constant temperature all the time. >>>More