-
Anonymous users2024-01-24If the switch box at the original advanced door in addition to the live wire, you can also see the zero line, you can install three wires between the switch installed at the head of the bed and the switch to enter the door, it is recommended to choose a three-core sheath wire, so that the three wires in the sheath are different in color to facilitate distinction, and then buy two single-connection and double-control switches, according to the instructions for wiring. Otherwise, it will be more troublesome, and it is recommended to use a voice-activated switch instead.
-
Anonymous users2024-01-23You need to buy a dual-control switch, take two lines of fire, the switch principle is very simple, I don't have enough points, I can't send a picture, you can buy it back and see it, it's very simple.
Hello! This requires certain conditions:
1. There must be a wire pipe between the entrance door and the head of the bed. >>>More
What you mean is to turn on the lights when you enter the door, and you can turn off the lights when you go to bed, so use three switches to control a light (there is a power socket with a light switch). Look at the diagram and install it according to the diagram (the power socket is not on the diagram).
Hello! This requires certain conditions:
1. There must be a wire pipe between the entrance door and the head of the bed. >>>More
Go to your broadband TV operator, they have a plan.
The following describes how to set up a wireless router to connect a wireless router to another wireless router >>>More