-
Anonymous users2024-01-24Ready to post it yourself? The lower outlet is the lowest point, and it is not mainly the mouth of the toilet. The four sides can be taller than it. There is also a rule that the other three sides should not be higher than the side of the door......
It should be a rough floor, and in addition, the floor drain should be lower.
pportunities, higher salaries and an
The small amount of work is to cut the groove along the tile joint to the drain, and try to make a narrow shallow groove during construction. If the difference between the elevation of the stagnant water and the sewer is a bit large, find out the thickness of the waterproof layer, if you can, bury it with 16 PVC pipes and then encapsulate it, and keep the ground surface and the original floor surface of the bathroom in harmony.
Because there is no zero wire for the switch, a zero wire must be drawn from elsewhere to connect the five holes.
Hello, you need to provide a room type or a door-to-door measurement room, if you want to do a wall to make a TV wall ceiling, it will take more than 20,000.