-
Anonymous users2024-01-24The gap adjustment hinge for the gap adjustment of the door crack of the security door.
The five small screws of the hinge are basically loosened, and then turn the eccentric screws in the middle, and turn to the gap that you think is appropriate, if you feel that the gap between them is not enough, stuff something between the door panel and the door frame, adjust it and then pull it out after it is healed, try a few more times to adjust it, and finally tighten all the screws.
-
Anonymous users2024-01-23Paste the tops.
Find the gap between the safety door and the door frame and measure the size of the gap to provide data basis for purchasing the right adhesive tops.
The standard stipulates that the gap between the door leaf and the hinge side of the door frame should not be greater than 2mm, and the gap between the opening edge of the door and the door frame in the closed state should not be greater than 3mm, then the width of the general anti-theft door frame minus the width of the door leaf should not be greater than 2 + 3 = 5mm, and the width of the door frame of the mother-child anti-theft door minus the width of the mother door leaf and the width of the sub-door leaf should not be greater than 2 + 3 + 7mm.
-
Anonymous users2024-01-221.The gap between the door gap of the anti-theft door is: the standard stipulates that "the gap between the door leaf and the hinge edge of the door frame should not be greater than 2mm, and the gap between the opening edge of the door and the door frame should not be greater than 3mm."
Then: the width of the general anti-theft door frame minus the width of the door leaf should not be greater than 2 3 5mmThe width of the door frame of the mother-child anti-theft door minus the width of the mother door leaf and the width of the child door leaf should not be greater than 2 3 7mm
2.The actual data measured by the installers of the manufacturer is: the width of the door frame is 1066mm, the width of the mother door leaf (748) and the width of the sub-door leaf (300) is 1048mm.
The width of the door frame of the mother-child security door minus the width of the mother door leaf and the width of the child door leaf is 1066 1048 18mm, and the actual clearance is larger than the gap specified in the standard: (18 7) 7 = 157.
-
Anonymous users2024-01-21What exactly is the problem of a lock or a seal?
-
Anonymous users2024-01-20Paste the tops. Find the gap between the safety door and the door frame, measure the size of the gap, and purchase the appropriate adhesive wool tops to provide data basis.
The gap between the opening edge of the door and the door frame fitting surface in the closed state should not be greater than 3mm, and the width of the door frame of the general anti-theft door minus the width of the door leaf should not be greater than 2 3 5mm.
Precautions for the use of security doors:
Lock maintenance: In the process of using the lock, put a little graphite powder or pencil powder into the lock hole to ensure that the key is inserted and unplugged smoothly. But do not add any other oil to lubricate it, so that the grease does not stick to the spring, so that the lock cannot be turned and cannot be opened.
-
Anonymous users2024-01-191) Search for door sewing and measuring sewing size: Retrieve the gap between the door and door frame and measure the cross size in order to provide a database for selecting the appropriate sticky strip.
2) Choose the appropriate size of viscous wool: Choose the appropriate viscous wool according to the size of the purification.
3) Wipe the adhesive area of the wool belt: Wipe the area of the wool belt with a clean towel, especially do not leave dust and moisture, otherwise it will affect the adhesive effect.
4) Paste the wool strips: Paste the prepared wool strips to the cleaning place, do not use too much pressure at this time, to prevent the glue from being uncomfortable and difficult to correct.
5) Closing control of the safety door: After the safety door is closed, after checking the adhesive effect, the inappropriate part is corrected, and it is compressed after checking the qualification.
6) Finalize the adjustment: Close the entire safety door and check that all openings are closed, resulting in good braking.
Paste the tops. Find the gap between the safety door and the door frame, measure the size of the gap, and purchase the appropriate adhesive wool tops to provide data basis. >>>More
The hidden hinges of all security doors are the same way of adjustment, the hinge square gap is small and loosens to extend outward, and the lock square gap is small to retract inward. . .
I just straightened the door of my house......
My door, the problem is that there is noise when closing, I thought it was the hinge that needed lubrication, and it was useless to add oil a few times, but then I found out that the whole door (not counting the door frame) was crooked, and it was tilted to the left after closing, so that the lower right corner and the door frame had friction, and every time the door was opened and closed it would rub violently, and the sound was really ...... >>>More
Want Want ......Isn't the big-breasted brother eating too many snow cakes, isn't it? It depends on whether you have an open hinge or a dark hinge, the open hinge is similar to the bedroom door, and the gap cannot be adjusted. The hidden hinge will loosen those screws, and you can adjust it.
Method 1: No adjustment - apply wax (or soap, grease) between the grinding door frame and the door panel, which can relieve the rattling sound, but you have to reapply the wax after half a year. >>>More