-
Anonymous users2024-01-24Solid wood furniture mold treatment method:
1. After the wardrobe is moldy, use mold remover or some mold removal methods to do a comprehensive cleaning and sterilization of the wardrobe, thoroughly clean off the fungus corpse and mold ash, and pay special attention to the fine seams that cannot be seen.
2. On the surface of solid wood furniture that has been cleaned and sterilized, spray the bamboo anti-mildew and antibacterial agent evenly on the product with a spray gun or watering flower watering can and dry it.
3. Place anti-mildew tablets on each surface of solid wood furniture products, and the anti-mildew tablets kill bacteria and inhibit the growth of bacteria in a closed space by releasing antibacterial factors, so that they can achieve anti-mildew and antibacterial effects.
4. Place biochemical desiccant in the finished solid wood furniture to reduce the risk of mildew due to moisture.
1. Fill the container with cold water, then add an appropriate amount of vinegar and put it in a ventilated room, and open the furniture door. In this way, it can not only evaporate the appropriate amount of water to protect the paint surface of the wall roof, but also absorb and eliminate the residual odor; 2. Put a bowl of diluted Amonia water indoors for 2 3 days, and the smell of paint in the room will disappear. 3. Put a bucket of hot water indoors, and put a handful of hay in the hot water, and after a night, the smell of paint can be removed. >>>More
Cracks are usually made with wood chaff into the cracks, then drip 502, then sandpaper sanded smooth, and then decide how to paint according to the color of your furniture.
Sometimes it took a lot of effort to buy back the furniture soon began to mold, this time to pay attention to, the reason for the furniture mold is mainly determined by the indoor temperature, if the humid environment for a long time, the furniture will soon cause mold, this is a certain probability, if you want to make the furniture not moldy, you must keep the room dry, when the mold phenomenon opens the window for ventilation, this has to be good, out of the sun, if it is the rainy season, especially in the southern region often rain and south wind days, The indoor will be damp, so it is necessary to close the window, very serious to turn the air conditioner in the dehumidification mode, you can also turn the air conditioner in the heating mode higher than the current temperature, so that the indoor temperature increases, evaporate the moisture, do not remember not to open the air conditioner for a long time, if there is no air conditioning friends can use a pot of charcoal or put some lime powder in the corner, so that you can also absorb the moisture in the air, the furniture will not be moldy again. Then use a dry towel to wipe the moldy surface clean, and then brush with transparent paint to isolate the surface of the furniture from external influences, so that the mold will not be more serious.
You can first use a soft brush to sweep away the mold on its surface, and then, then use an appropriate amount of general-purpose antifungal antibacterial agent, according to the instructions for use, evenly spray on the surface, and wait for it to dry, so that it can play an anti-mildew role.
We can use a softer and dry towel or rag to wipe the condensed water droplets on the surface of the household solid wood door, and then we have to deal with the situation of moisture inside. In ordinary life, we still need to pay attention to the humidity of indoor air, and it is a very good way to open windows and ventilate in time! Because the dampness of household solid wood doors is closely related to the production process of wooden doors