-
Anonymous users2024-01-24The hot and cold water faucets are finally through a water outlet, the situation of blocking one side seems to be very few,,, the problem of water pressure by tap water is relatively large, how is the water pressure of other faucets, if it is very slow, you can only make a pressurized equipment, hot water is through the water heater, regardless of the size of the water pressure, after the water heater the water pressure is about the same, there is a possibility, the general installation of these hot and cold water faucets will use angle valves, you can check whether the angle valve of cold water is opened to the maximum.
1 All caused by moisture. Mainly from the two aspects of sanitation and ventilation to cure hygiene: the implementation of three days of a big cleaning, a small cleaning every day, no sanitary dead ends, do not use the cabinet to move, open the cabinet door, often clean up the things in the cabinet. >>>More
Method 1: Close the main water valve first, and then put the faucet handle with a red and blue mark of about 8 mm, buckle it down, loosen the fixing screw counterclockwise with a flathead screwdriver, take off the handle, use a live wrench to disassemble the valve core of the faucet, open the upper part of the gland with a wrench, and take out the ceramic valve core inside. >>>More
After designing the drawings of the pipe laying and confirming that the requirements are met, you can start laying the pipeline. The first step must be to find the main valve of the hot and cold water pipes and turn them off, and connect the inlets of the hot and cold pipes to a main valve, so as to facilitate the overall management. >>>More
Friend; Let me ask, your booster pump only pressurizes the kitchen, the bathroom is not, and the water heater water is a sanitary indirect water pipe, right?
Generally, the hot and cold water pipes in the bathroom are basically at a distance from the ground meters, this height is generally suitable for the washing machine and the mop bucket to receive water, if the home is ready to use the kind of automatic washing machine, it is best to keep it above the meter, the water pipe faucet can be installed when it is high, and other hoses can be installed to connect the water, and it is impossible to connect it if it is low.