-
Under normal circumstances, the installation of the indoor unit of the air conditioner should be 20 cm to more than 30 cm away from the top of the room without affecting any decoration on the top.
First, it is conducive to indoor air circulation;
Second, it is to reserve space for maintenance and overhaul of air conditioners.
The air conditioning holes are all left, then there is no room for negotiation. Please ask the installation master to design and install the air conditioner "according to" the air conditioning hole. Generally, the width of the indoor unit of the hanging air conditioner is about 36 cm, and the space location is still enough.
For any decoration on top, be 20 cm to 30 cm more than the top of the room.
Generally, the installation location of the air conditioner should avoid the heat source, and the hot air elimination and noise interference should not affect the neighbors. The installation height of the outdoor unit should be lower than that of the indoor unit, which is conducive to the circulation of refrigeration oil. The installation of the outdoor unit should be free of hot air short circuit circulation, so as not to affect the heat dissipation
The installation location should be conducive to maintenance, easy to drain and not affect pedestrians, to avoid or stay away from high-voltage lines, and there are spokes.
-
Theoretically, a height distance of more than 15 cm should be left, if the space is too small, it will affect the ventilation effect and reduce the temperature exchange, but the impact is not very large, as long as the indoor unit filter is kept clean and clean during daily use. If the distance is too close, it is best to drill more holes with a large drill bit above the ceiling (the upper part of the air inlet of the indoor unit of the air conditioner) to improve the ventilation effect, so that it will not affect the appearance.
-
It has an impact, which will make the return air effect of the air conditioner not good. Increase the working hours of the air conditioner. But it will not affect the life of the air conditioner, and the power consumption can be seen on the nameplate on the right side of the air conditioner.
-
The life will not be affected, but your inner machine should be higher than the hole, otherwise the water will not be able to get out, 42 minus 5 and 37 left, and then subtract the air conditioner 32, there is still 5 left, this distance, you hit the expansion screw on the wall, and the internal machine can not be hung in...
-
It will not affect the life of the air conditioner, and it will take a little electricity in the summer because the hot air is on it.
-
There is no problem, feel free to use.
The ceiling air conditioner is a special treatment for cold bridge, air leakage and water leakage, which has the advantages of less occupied area, flexible installation mode, convenient maintenance and other advantages, and is fully suitable for all kinds of hotels, shopping malls, airports, hospitals, factories, scientific research units and other comfortable places. Built-in air conditioners are not vertical or hanging air conditioners, there used to be a window air conditioner, and the installation method was to make a hole as big as an air conditioner in the wall to put the air conditioner in. This type of air conditioner uses a condenser and an evaporator combined. >>>More
There is no good way to do this, but to find a way to reduce the height of the air conditioner through the wall hole. >>>More
The ceiling type is the lamp tube hidden around the ceiling around the room, and the pendant tube type is the lamp tube that is hoisted with a chain or other metal hangers in the middle. See Fig
The ceiling can be decorated, but to meet the requirements of the building decoration fire code, try to use Class A non-combustible materials or B1 class incombustible materials.
It is necessary to install copper pipes before hanging the ceiling, or burying a 50PVC pipe in the ceiling, and installing copper pipes in the ceiling is also OK.