Kitchen drain unclogging

You can use stomach digesting tablets to put the stomach digesting tablets or vitamin effervescent tablets at the outlet of the sink, and then rinse them with boiling water, which must be washed with boiling water and hot water. Then the second method is to use a combination of vinegar and baking soda, then rinse the baking soda and vinegar with boiling water, then pour a bowl of baking soda into the sink, then pour half a bowl of vinegar, wait for about five minutes, and then pour boiling water into the spout to rinse.

When installing the sewer, first take out the drainer under the basin, which is generally a drainer fixed by screws, unscrew the fixed part, and pay attention to picking up the countertop of the basin when installing the basin drain pipe. Xiankai.

2. Put the basin on the countertop, and align the sewer outlet with the outlet of the countertop, which is the key step in installing the sewer, and it is necessary to ensure that the position of the outlet is aligned.

3. Wrap raw material tape around each interface of the sewer to ensure that there is no water leakage. This is because the flow of water that the sewer needs to pass through on a daily basis is usually large, and if it leaks, it can be serious.

4. Aim the sewer at the sewer, pay attention to put it in flatly, and take down the retainer of the sewer when installing, if you forget, there is no way to fasten it with the retainer.

5. After installation, it should be tested, and there should be no water leakage.

Kitchen drain unclogging methods:1Use chemical cleaners:

You can use a chemical cleaner available in the market, pour it down the drain, wait for a while and then rinse it with hot water. 2.Use a pipe unclogger:

Insert the pipe unclog into the drain, rotate and push until the drain is unclogged. 3.Use suction cups:

Place the suction cup on the drain, press down firmly, then pull up quickly, repeating a few times until the drain is unblocked. 4.Clean the drain filter:

Cleaning the drain filter can prevent clogging, and regular cleaning can reduce the occurrence of clogged drains. 5.Precautionary measures:

Avoid pouring solid substances such as grease, food residue and other solid materials into the sewer, and re-energize to reduce the occurrence of sewer blockage.

Kitchen drains are often clogged due to the build-up of grease, food scraps, and other substances. Here are some common ways to unclog kitchen drains:

Use chemical cleaners: You can buy some chemical cleaners specially used to remove pipe blockages, operate according to the instructions for use, wait for a period of time, and rinse with water.

Use household tools: You can use household tools such as pipe grippers or pipe elbow pliers to reach the tools into the sewer and rotate them back and forth or pull them up and down until the blockage is removed.

Clear the blockage: If neither chemical cleaners nor household tools can clear the blockage, then a manual cleaning method can be used. Wrap your hands in gloves or plastic bags, remove the blockage with pliers or digging tools, and rinse with water.

Find a professional: If none of the above methods can solve the problem, it is advisable to find a professional plumbing unclogging company who can use more advanced equipment and technology to clear the blockage.

It should be noted that before dredging, the oil around the sewer mouth should be cleaned so as not to affect the dredging effect. In addition, care should be taken not to pour grease, food residues and other substances directly into the drain during daily use to reduce the occurrence of blockages. Okay, that's all for me, I hope it can help you.

If the kitchen drain is clogged, you can try the following methods to unclog it:

Hot Water Rinse: Boil a pot of hot water, pour it down the drain, and let the hot water wash the town pipes, sometimes softening the blockage and allowing it to flow.

Hand unclogging: Use a pipe unclog or pipe puller, insert the sewer, rotate and move up and down to clear the blockage.

Chemical dredging agent: You can use commercially available chemical dredging agent, pour it into the drain according to the instructions, leave it for a period of time, and then rinse the water and dust for flushing.

Resistance Pump: Use a resistance pump to punch the sewer to create a certain amount of pressure to help remove blockages.

Professional dredging: If the above methods are ineffective, it is recommended to have a professional pipe dredging service to deal with it, they usually use a high-pressure hood brother coarse water gun or other professional tools for dredging.