How to install an integrated ceiling in a room, half flat top and half inclined roof

Updated on Suspended ceilings 2024-09-11
2 answers
  1. Anonymous users2024-01-24

    I haven't seen it, and I don't think it's too ideal. Generally, there can be a distance of 6 10cm between the floor and the ground when laying the floor, so unless you buy a carpet with such a thick thickness, the floor of the house is uneven, generally high and low, and it is easy to trip.

  2. Anonymous users2024-01-23

    There is no need to do anything shelf. You just need to fix the wood on the beam, the carpenter will, fix the keel on the wood.

Related questions
3 answers2024-09-11

It should be that the light source in the luminaire is composed of two independent LED strings, and the situation occurs when one or more LEDs in one or more of the strings are damaged; Only two wires of the driving power supply are connected to the lamp, and then the power supply is supplied to the two LED strings respectively in the lamp, so it should not be a problem of the drive, otherwise the whole lamp will not be lit.

4 answers2024-09-11

Of course, it is a sliding door for the wardrobe with opaque glass, which is normally recommended for customers to do our interior design.

6 answers2024-09-11

Since it is a dry area, the ceiling of the roof can be completely gypsum board ceilinged, which is more beautiful. >>>More

1 answers2024-09-11

1. The driving power supply of all the lights is damaged. >>>More

1 answers2024-09-11

This means that your light switch is not connected to the live wire, but only the neutral wire. Since the LED is dimly bright, the current used can be very small. Therefore, when the live wire is not disconnected, the induced electricity can also make it faintly bright. >>>More