-
Take a picture of the parts you disassembled.
-
If you can open it, you can install it, and it's just a matter of a screw, and your hands-on ability won't be so bad
The specific steps are as follows:
1. According to the installation size of the lock body, drill and chisel the installation hole of the lock body. >>>More
The landlord, decide on a lock key of the so-called.
Lock cylinder. In the lock cylinder, it is decided that if the teeth are actually on the lock cylinder, let the length of the small copper pillars be high, generally speaking, as long as these small copper pillars are replaced, the lock cylinder can be reused. Therefore, the lock cylinder is recycled, and the manufacturer can modify it and install it on other doors. >>>More
1.The thin sheet is fixed to the upper and lower parts of the lock body to encapsulate the lock box, corresponding to the position of the upper and lower holes of the encapsulation lock box. 2.The small spring tip is inserted into a thin plate with a small hole in the movable deadbolt and the other end is snapped into a nearby uranium pin.
1. If it is opened with a key, then the lock cylinder or lock body is broken. >>>More
Won't let you in? This is not a problem with the lock picking company, 110, 119, they don't want you to go in, even if you do, you should be kicked out.