-
There are many such situations, I have seen a kind of light is, 1 on white light, 2 on warm light, 3 on (that is, full on) into neutral light, I don't know if you are like this, if you are also in this situation then it is right; There is also a situation that the segmenter is installed wrong, it is originally 3 kinds of light colors, that is, it is to be divided into three sections, he installed a two-stage segmenter for you, then it will not work, just change the segmenter, the remote control is A, B, C, D this kind, A is fully open and all off, B, C, D each control a light color.
-
Just change the lights to one color.
Yes, just connect each line in series and then connect it in parallel.
It should be that the splitter is broken. The lamp had to be removed. Use a multimeter to measure, and the other two groups need voltage. Know where the problem is.
Hello, this has nothing to do with wiring, it should be that the digital segment switch is broken. This group does not light up, check whether the output of this group is normal. >>>More
Seeing your description, it should be that the heating duct design is unreasonable. >>>More
It is estimated that it is a processing problem on the ground, and the signal on the ground interferes with the power chip of other lights, causing malfunction!