Consult the electrician, how to check the leakage of the power supply line of the kitchen socket, al

Add a long wooden strip, pin it to the hole, and then fix the lamp.

Kitchen, bathroom, three bedrooms, living room light, living room socket, dining room lamp, dining room socket (can be integrated with the living room into a road) bathroom two ways. Divide it into a little more detailed, and if there is a problem in the future, it is convenient to maintain. Circuit breaker, which can be calculated according to the power (w v=A), should be left in a certain amount.

Turn off the main power supply, connect the power supply in one of the 3 sockets, and see if the other two sockets have power, so that you know where the disconnection is. When carrying out the above exercises, it is necessary to eliminate the short-circuit fault first. Otherwise it's not safe!

Circuit breaker tripping, generally there are several phenomena, 1, the circuit breaker load current is small or damaged, to eliminate the circuit breaker damage can do this, turn off the circuit breaker power supply, the circuit breaker output line --- that is, the following line to remove (not the upper line you said), connect to other circuit breakers below to try (preferably greater than the load current of the original circuit breaker, and the circuit breaker with leakage protector), if not tripped, the original circuit breaker must be replaced. 2. There is a short circuit, leakage or wrong line connection in the output circuit of the circuit breaker (the latter point is less likely to be at home, because it is normal before going out). >>>More

There is a kitchen design software on the IKEA website, which is very simple, and it is recommended to use the software to try to put it yourself. My kitchen was designed on it, and later the decoration company said that I designed it very well!!