-
Anonymous users2024-01-24The toilet is not on the water is broken on the water It seems that it is not a problem with the water The two keys are a big point to flush the toilet 6 liters of water The small key is to flush the urine 3 liters of water If the water leaks, the water is broken If you don't repair it, just change it directly, it's very good to change It shouldn't be that the water is not on the water, it seems that the water on it is leaking out (it's a waste of water) If the water is not leaking, the water in the tank is not on the water, or the water is broken (look at the angle valve switch) You can find a merchant to repair and replace the water parts for you It should be free during the warranty period The brand. There is no need to repair the water parts, and it is easy to have the same problem after repairing them.
-
Anonymous users2024-01-23It should be that the float valve is broken, it seems that the problem is not big, and there is no problem with repair.
-
Anonymous users2024-01-22If there is a problem with the water tank accessories, ask Fei Fei to help, and the ID is Want Want ID. Just enter it and you'll find Fifi. Professional and honest, affordable and useful.
-
Anonymous users2024-01-21It is estimated that the water inlet part is a little stuck, open the water tank cover, and remove the water part to see!
-
Anonymous users2024-01-20The tank fitting is broken, find someone to replace one.
The toilet does not automatically water the toilet, indicating that there is a problem with the toilet automatic water supply system, you must find a professional maintenance master to help check it and help you solve the problem.
There is a problem with the float device of the toilet, after each flush, the float can not return to its position and can not be on the water, you need to ask the maintenance master to repair, if it can be repaired the best, you can't replace the whole fitting.
Install it upside down, lift the float The valve should be closed, and it should not be watered. Otherwise, water will enter.
Summary. Hello, kiss the toilet bowl does not automatically water should take the lid of the water tank away for inspection, to see if the toilet lid will be pushed to the water inlet valve in the state of the cover, will be topped to the situation only need to adjust the direction of the water inlet valve can be solved, and then check whether the water inlet valve float moves up and down freely, if there is a card in the state can not be automatically watered, at this time you need to rotate through the cross eye to adjust the height of the float. >>>More
If the toilet is always on the water, maybe it is a problem with the water tank, you can check whether the material or parts of the water tank will be too old, because some small parts are relatively unused, and it will not take long for the phenomenon of damage, if it is used for a long time, there will be problems, then it is a phenomenon of natural wear and tear, as long as it is replaced, the phenomenon of leakage on the toilet does not stop and cannot be eliminated, it may be because of the sewer pipe, because the function of the sewer pipe is used to connect the toilet tank, It is also possible for a major conveyor pipe to have this problem.