-
Anonymous users2024-01-24The water in the toilet bowl is full, and the water does not come out when you press the switch, open the upper cover, and press the switch inside and it still does not get water.
The main sewer pipe in your building is not clear. When someone flushes the toilet upstairs, the air in the pipe has no place to go, so it is discharged to the nearest place, and your toilet is the closest, probably your home is on the third floor.
Summary. 1. It may be that the inlet pontoon of the toilet is separated by the wall of the water tank or the rest of the parts, and we can adjust the position of the inlet pontoon to the appropriate place. 2. The filter core of the toilet bowl is blocked by foreign objects, we can remove the filter and clean it, and then put it back on. >>>More
It seems that the rubber ball valve in the water tank is a little old, or the gasket below is aging, when the amount of water is small, the pressure is not enough, there is a gap between the ball valve and the sewer pipe, so it will leak, when the amount of water is large, the pressure is large enough, and the ball valve will naturally be pressed, and it will not leak. >>>More
1. The water inlet valve does not enter the water.
1) Check whether the tap water pressure is too low. >>>More
The water level of the toilet tank is controlled by the float and inhibition in the tank; They don't work well and overflow incidentally.