What material is used for the outer door of Casarte refrigerator

Updated on Exterior doors 2024-09-15
2 answers
  1. Anonymous users2024-01-24

    Specifically, depending on the model, stainless steel glass,

  2. Anonymous users2024-01-23

    There are steel plates, and there are glass ones.

Related questions
3 answers2024-09-15

770*910*1780 .

Casarte French side-by-side refrigerator breaks through the traditional double-door beam design, the refrigerator room is 75 cm ultra-wide space, which can store large-volume food, the freezer drawer design, using the American Yagura and Germany Hettich imported slide rail, three-section extended slide design, stronger load-bearing capacity, the upper freezer drawer can bear about 45KG, the lower freezer drawer can bear about 80KG, and the three-section guide rail design ensures that the freezer drawer is completely pulled out, and the access to food is more convenient. >>>More

1 answers2024-09-15

Lower-drain washing machines do not have drain valves. On the drain, add a trap to prevent odor overflow. If the height is not high enough, you can raise the washing machine.

1 answers2024-09-15

Casarte is a famous brand, the quality of famous brand products is very good, but there is a situation in operation, the fault column of the manual, there are markings, there are troubleshooting methods, you can also call the installation master of the telephone consultation.

1 answers2024-09-15

There is no drain pump for the lower drain. It can be used, and the drain pipe should have a P bend.

1 answers2024-09-15

The water inlet pipeline of your home should be too thin, when you turn on the cold water, it will cause the water in the cold water pipe of the water heater to flow backwards, and when the faucet is closed, the cold water will be replenished into the water heater, and the machine is misidentified as the flow of water, so it will automatically start, the solution is to connect a one-way valve on the water inlet angle valve, which can prevent the water from flowing backwards, and the problem can be solved; It is also possible to replace an angle valve with a check valve.