When opening the door, the tongue of the anti theft door lock will leak a little, which is not compl

Updated on Security door 2024-09-14
1 answers
  1. Anonymous users2024-01-24

    1. The leakage point of the lock tongue is a lock body fault outside, and the relationship with the lock cylinder is not very large.

    2. If the door is open and the key is easy to screw, it is not debugged when installing the lock cylinder.

Related questions
What brand of fingerprint anti-theft door lock is better?
12 answers2024-09-14

It is recommended to use Yajie fingerprint lock, and today I installed a 5800 yuan one for customers, which is super luxurious, practical, convenient and safe.

The anti-theft door lock is screwed a little from the inside, can it still be opened from the outsid
2 answers2024-09-14

It can't be opened, this is a one-way lock.

The anti-theft door lock always can't be twisted, and you have to pull it out a little to twist it,
1 answers2024-09-14

The lock cylinder must not be refueled, the door lock is very astringent and difficult to screw, you can use the following method: first cut a pencil with a knife, cut the pencil lead into powder, and then put these powdered pencil leads into the lock core (the pencil lead can play a lubricating role).

When the anti-theft door of the commercial house is opened. Slowly press down on the security doorkn
1 answers2024-09-14

No, the handle of the security door is not so fragile, and you will not be broken in this way, unless it is your accumulated effort that may be broken, otherwise it will not.

When opening the security door, you need to pull the key out a little to open it
4 answers2024-09-14

Because of the long-term open door,.The friction between the key and the lock cylinder makes it more and more difficult to insert the key. The solution is to buy a special lubricating powder for the lock cylinder. And pencil lead gray is also fine.