-
Anonymous users2024-01-24Stainless steel generally looks better in small strips, and if the surface is too large, it will not look good, and it needs to be slotted, and stainless steel screens can also be made at home (titanium plating is required) or old.
If it is pasted on, first of all, the original foundation surface should be flat, and then the glue must be evenly brushed with a brush, and the glue layer can not be thick or thin. After sticking on, it needs to be fixed at one end of the whole surface under pressure, and the auxiliary device is removed after the glue is solidified.
Installing stainless steel strips to paint chipping may be bad glue, try a little more.
Putty is the best to deal with, you can use a small ink shovel, you can use water blisters, and you can also spray water to wipe after shoveling.
The surface-mounted stainless steel strip used on the ceiling should not fall off, because the stainless steel strip is not solid, it is stamped with stainless steel plate planing groove, if it is L-shaped during installation, structural adhesive will be used during installation, if it is a U-shaped groove installation, it will be used to install the base strip plus structural adhesive, if it is not to cut corners, do not worry that it will fall off for a long time.
There are many series of stainless steel kitchen cabinets, my family makes stainless steel kitchen cabinets in Bamberg, there are pressing series, baking paint series, etc., the cabinets of pressing and baking paint series are relatively expensive, and they are more graded. If you want to have a pattern, only the press can do it. The one I customized is also pressed, the appearance is very good-looking, the pattern is a little bit, not a lot, and the overall temperament is very good. >>>More