Is it okay to brush the waterproof layer of the geothermal toilet first without leakage, then lay th

Updated on Bathroom 2024-09-11
4 answers
  1. Anonymous users2024-01-24

    Now we rarely do geothermal heating in the bathroom (of course, except for the dry area of the bathroom, the water will seep down, but after a few years, the problem has come, the conventional practice is operated in this way, resulting in the cracking of the cement layer of the floor tiles, because the water pipe of the geothermal paving is elastic, and the shower must not be done).

  2. Anonymous users2024-01-23

    No, the water does not leak is used to block the water after the leak You can't use the water leak as a waterproof material It is recommended to use white polyurethane Good extensibility Environmental protection There is no irritating odor, and the thickness of the brush fully meets the requirements.

  3. Anonymous users2024-01-22

    The conventional practice is to operate in this way, but after a few years, the problem has come, because the water pipe of the geothermal paving is elastic, which causes the cement layer of the floor tiles to crack, and the water will penetrate down, and now we rarely do geothermal in the bathroom (except for the dry area of the bathroom, of course, the shower room must not be done). If you have more questions, you can click on ID to consult.

  4. Anonymous users2024-01-21

    Dalian Hongyuan enterprise is a professional ground source heat pump manufacturer, millions of square meters of construction experience, professional technical team, to provide you with quality services.

Related questions
My bathroom was brushed with a layer of waterproofing, then brushed with a layer of waterproofing, a
1 answers2024-09-11

As long as you choose a good waterproof material, there will basically be no problem. But you have to do an experiment with the water off for 24 hours and then go downstairs to see if there is any leakage.

Isn't it better to brush the bathroom waterproof and brush a layer of water on top of it without lea
12 answers2024-09-11

Do toilet waterproofing, do not need to brush water, no leakage. >>>More

Is it okay to use a waterproof bathroom first with water and then use a waterproof Js brush?
2 answers2024-09-11

It is completely possible, one layer is rigid and one layer is flexible, pay attention to the maintenance of water leakage and the thickness of JS, if you want to be foolproof, you can paste a layer of non-woven fabric in the corner.

Toilet waterproof material and water leakage which to apply first
6 answers2024-09-11

Look at what you mean for people who don't know anything about waterproofing, provide free professional technical advice on concrete waterproof leakage repair!

The bathroom is waterproof, first brush it twice and then brush it again
2 answers2024-09-11

The base surface of the coating has high requirements, and the ground does not require sand. Brush the thin dots of the primer 3 times to survive. On the basis of one time, do it twice, brush it once, and the root and yin and yang angles need to be treated separately.