-
Anonymous users2024-01-24Look for it on Taobao, do you buy integrated ceiling LED lights? Commonly used specifications are 300 300, and 600 300
Dilang, Vantio, Yading, Tianlang and so on. As far as I know, bathroom hardware like Vantio is a good brand, cost-effective, good quality, others have not been used, should have their own characteristics! Hehe...
It should be that it is not tight enough when twisting and causing it to loosen! This kind of problem doesn't matter much, because if you are disrespectful, he is naturally easy, due to pressure, it becomes loose and causes the power to be connected for a while.
Find out if it's always off or if it's often off. If it is sometimes bright and sometimes not, it is estimated that the copper sheet of the lamp holder or the binding post is not in good contact. If you are inexperienced, don't do it yourself, find someone who understands to check it. After all, electrical work is dangerous.
Do you have a separate circuit in the bathroom? If it is set separately, then don't push the air switch in the control toilet at the moment, and then send the beam to roll and push the gate knife up again. If you don't open the light switch in the bathroom, it won't jump, then there is a problem with the wiring of the bathroom. Dust remnant.
If the bathroom is separated from wet and dry, it doesn't matter what kind of lamp is used, if it is not separated from wet and dry, you must use a moisture-proof lamp, because the lamp in a humid environment for a long time is prone to short circuit and other situations, so you must pay attention to moisture-proof, and it will be safer to use a lamp with moisture-proof function.