-
Anonymous users2024-01-24This has something to do with the adhesion of the lacquer. Water penetrates into the surface of the substrate through the paint film, so that the paint film is separated from the substrate, and the paint film appears to be blistered on the outside, and it will fall off after a long time. Choosing a paint with strong adhesion can delay the time of water vapor penetration.
Either way, the water leak problem will definitely have to be solved. If it is a floor leakage, you have to find out if the relevant person in charge of the renovation is a problem, if they are responsible for repairing, then the problem will be solved, if it is not their responsibility, you have to arrange your own waterproof leakage, the bathroom is waterproof and not leaky, then you can use K11 home decoration, JS polymer cementitious, polyurethane waterproof coating.
What a room type! First of all, the shear wall cannot be moved, and secondly, the door can be changed. Seal the toilet door opposite the original door, open it on the wall of the second bedroom, and move the door of the second bedroom to the position of a door. However, in this way, the master bedroom has to take a detour to the toilet.
1.It depends on whether the sanitary partition wall reaches the top and whether it is connected with other areas; 2. See if there is any abnormality in the ceiling on the top of the bathroom, 3. Whether it is an independent ventilation fan or a central air-conditioning system; 4. Identify the type of paint smell so that you can find out the cause faster.
There is an impact, so the room should be ventilated, and after a while, the smell will become smaller and smaller. In addition, half a bowl of aged vinegar is placed under the door to have a certain adsorption function.
Forget it, of course, unless you usually put the sliding door on the bedroom side, although it is not a crack, but it is better than a straight pair.