-
Anonymous users2024-01-24If the water in the sink is not full, it may be that there is a problem with the control of the water restriction inside, and if it is gelatinous, it should be aged, and you can replace it with another one. If the entire pump is broken, the entire pump needs to be replaced.
The newly bought toilet leaks after it is full, indicating that it is on the switch button and has not been adjusted properly.
The control valve is lowered a little to see if it has an effect, if there is no control valve is damaged, try to clean it, but if it doesn't work, you can only replace it. >>>More
It depends on what your tank looks like. You can see for yourself that the thing that can cover the water pipe nozzle in the water tank is controlled by that piece, and then see whether the position of the piece has changed or broken, and if it is broken, it needs to be replaced. >>>More
The "water level of the toilet drain at home is always at a certain level" that you see should be the water level in the toilet, and its decision is determined by the S-shaped water storage play of each toilet. The height of each toilet is about the same as that of the S-bend. >>>More
There is an adjusting screw (white) on the float (blue) next to the inlet valve, and the adjusting screw (white) is twisted clockwise, so that the float (blue) will move downwards and the water level in the tank will also drop. >>>More