-
Anonymous users2024-01-24Waterproofing is mainly to see the toughness and waterproof performance, generally after 48 hours of closed water experiment, to see if there is leakage, some corners or joints are best pasted with some fiber paper, if it is on-site construction to see whether the wall is also brushed, generally in height of 80 cm to 1 meter 5
-
Anonymous users2024-01-23Just do a good job of waterproofing (waterproof paint is dry) without installing other things, just plug the sewer pipe mouth with something, fill the bathroom pool with water, wet the surrounding walls (don't pour too much at a time, play a few more times) Check whether there is water leaking to your downstairs bathroom, see if the walls of the bathroom partition will be very wet and have water stains, if everything is decorated, check again, it is too late to find the problem.
-
Anonymous users2024-01-22Do a closed water test, release the water for 48 hours, and look at the top of the downstairs neighbor's bathroom.
-
Anonymous users2024-01-21Test the water, put the water and wait for 48 hours to be OK if the water does not leak
Check the waterproof effect of the bathroom, now the most commonly used method is the most closed water test, the purpose of the closed water test is to check whether there is a leak in the waterproof construction, whether the waterproof function is sound, the following is a detailed inspection method: >>>More
1.Where does the bathroom smell come from in your new home? Is it a floor drain, a toilet, or a wash basin? >>>More
It's not the same. The waterproofing of the bathroom is treated with polymer, and the normal is 1 2 times, and the water seepage test is done when 48 72 small blindness. The roof waterproofing base Min Heng adopts particle membrane waterproof treatment, does a good job of flowing water slope and drainage holes, and uses manual grinding to get the combustion test results.
It is possible that you use the coating film waterproofing, rather than the membrane waterproofing (polymer waterproof material), the coating film waterproofing has just been completed and the structural floor slab is integrated with the surface, and there is a protective film on the surface, when the time is long, the concrete structure floor slab may produce cracks, and then tear the coating film waterproof layer attached to the floor, thus leaking. It is recommended to do the waterproofing again, using polymer membrane, the effect is much better than the liquid waterproof material.
The water test to detect whether the waterproof construction of the bathroom and kitchen is qualified is called the closed water test. >>>More