-
Anonymous users2024-01-24If the geothermal floor is damp, there will be several continuous discoloration phenomena, which greatly affects the aesthetics of the geothermal floor and the health of the room.
1. When the geothermal floor is paved, the ground is uneven, there are uneven small pits, and after the geothermal floor is paved, the moisture-proof film is broken, resulting in ventilation. The measure is to scrape the floor flat before installing the geothermal floor.
2. When the geothermal floor is paved, there are sand particles on the ground, which are not cleaned, and the moisture-proof membrane is broken, resulting in ventilation. The measure is to clean the floor before the floor is paved.
3. When the geothermal floor is paved, the connection of the moisture-proof film is not tightly adhered to, resulting in ventilation. The moisture-proof film should be glued tightly with tape, preferably with a width of more than 60mm plastic tape, to ensure that the moisture-proof film is not breathable.
In the above three cases, the moisture content of the geothermal floor increases sharply, and some soluble substances in the wood are dissolved and some color-changing bacteria take action, resulting in wood exhaustion or black discoloration.
4. Individual areas use electric heating, because the electricity fee adopts the peak, valley and flat charging method, that is, after 12 o'clock in the evening, the electricity bill is half price (valley), many users turn off the switch during the day, turn on the electric heating equipment after 12 o'clock in the evening, and adjust the indoor temperature to 27 30, and the surface temperature reaches nearly 100 in a short time, causing the destruction of the moisture-proof film of the geothermal floor, producing air permeability, and making the geothermal floor discolored and deformed. This violates the requirement of geothermal heating (the surface temperature is controlled at around 40). It is recommended that the user should change to 24-hour continuous heating, otherwise, the discoloration can only be borne by the user.
-
Anonymous users2024-01-23The blackening of the geothermal floor is caused by the high moisture content of the ground, which is opened to accelerate the volatilization of moisture and be absorbed by the wooden floor. In general, if there is not much moisture, the blackened color will fade slowly. However, if it is water seepage in the bathroom, it will become more and more serious, and the only way to find out the source is to replace the wooden floor.
-
Anonymous users2024-01-22Under normal circumstances, you can't lay solid wood floors when doing floor heating, and I don't know how you will choose solid wood.
-
Anonymous users2024-01-21It is recommended that the user should change to 24-hour continuous heating, otherwise, the discoloration can only be borne by the user.
In terms of emissions, it is said that the glue contains formaldehyde, so the formaldehyde of the reinforced composite is more than that of multi-layer solid wood, and the formaldehyde of multi-layer solid wood is more than that of three-layer solid wood. In particular, the amount of emissions after underfloor heating will be greatly increased. So comparatively speaking, parquet is much better.
Solid wood flooring should not be used for underfloor heating, because there will be different degrees of cracking within two years.
Apply the floor coating oil evenly to the towel of the floor mop according to the "Z" shape, and then apply it evenly on the floor; After the application is completed, change the towel to absorb all the floor coating oil on the floor surface, it takes about 5-9 minutes, and then wipe back and forth with the floor drag, you can find that the floor surface will be brighter and brighter. It can be used normally after 4 hours, and completely solidifies after 48 hours to form a nano glass protective film.
OK. Because as long as it is a regular brand of wood flooring products on the market, they have been tested, and some have been treated at high temperatures, and the formaldehyde emission is strictly controlled below the national standard. In addition, the single-body solid wood floor is a floor plate made of wood without patching and processing, which has the advantages of warmth and softness, natural and pleasant, sound insulation and environmental protection, and good foot feeling. >>>More
When installing solid wood multi-layer flooring, should it be nailed with a floor nail or a gun? Some people say that the floor hit by the gun nail will be loose and there will be an abnormal noise, is that true? >>>More