-
Anonymous users2024-01-24It's the valve inside the tank that's faulty, and it's the one that connects the float ball. It is very likely that it is not reset, gently move it to see if it works, it really can't be replaced, it is very simple to press it yourself. Plumbing materials are available at the store.
-
Anonymous users2024-01-23The water seal in the water tank is that the water seal of the drain does not reset or is stuck, check it, and move the activity to see if it can be restored.
-
Anonymous users2024-01-22That's a problem with the inlet valve, the sewer valve, you see if there is a mat in the water parts, whether it is broken, or buy a whole set of water parts and replace it, there are plumbing and sanitary ware sellers, don't buy too cheap, find a master to replace it.
What should I do if my toilet keeps putting water in the tank? The master teaches you by hand, do it yourself, and don't need to spend money to fix it.
The float is too high, you can open the tank to see if the float is pushed to the end, generally the float to the water level with buoyancy to the water outlet to resist, if the screws that fix the float are loose, it will generally continue to leak. There is also a possibility that the rubber stopper is broken, and if the stopper is broken, it will usually have to be replaced.
If it is caused by the water tank, check whether the parts of the water tank are good, replace the parts that cannot be repaired, if the problem is more serious, it is recommended to replace the entire water tank; If it is caused by the sewer pipe, check the interface of the water pipe to see if there is any looseness, if the pipe is rotten and replace it again, if it is a problem at the interface, fix it with a similar wire.
Let me help you analyze:
The water tank is overflowing, it must be that the water level is too high, and the high water level means that the water inlet valve in the tank accessories does not work, and there is no way to stop the water automatically, so why can't it stop the water? There are two situations, the first is the quality of the inlet valve itself, the second is caused by improper installation, but the improper installation generally occurs during the period of just decoration, if it is used well a few days ago, and the toilet bowl has not been touched, it will suddenly overflow, indicating that the inlet valve is faulty, and then it is necessary to replace an inlet valve >>>More
The water tank of the toilet has been on the water, and the small rod will not be on the water, but it can not float up automatically, check whether the linkage between the connecting rod and the water program is separated, or the linkage position is adjusted too high, and the water level rises to achieve the effect of driving the linkage rod, you can readjust the position of the linkage rod to try.