-
Anonymous users2024-01-24The decoration of the fast restaurant is the same as other decorations, two times is enough, do a good job of anti-cracking treatment at the joints, and then you can fill the batch of putty, dry and then scrape a thin layer, dry and smooth can be pushed paint.
-
Anonymous users2024-01-23Gypsum board is first treated with seams. After processing. Leveling. Generally, 2-3 layers of putty are sufficient. There are too many putty batches. Instead, something went wrong.
-
Anonymous users2024-01-221. Generally, gypsum board can be scraped putty 2 times.
2. The same is true for scraping putty in fast food restaurants.
3. First fill the batch, and then scrape the second putty when the first putty is 80% dry. Don't scrape the putty too many times, otherwise the object will be reversed.
-
Anonymous users2024-01-21Scraping putty is the basis for scraping paint in the later stage, and it doesn't matter how many times it is, as long as it can be completely covered after sanding.
The size of the ceiling should be 20 cm high from the wall point, 30 or 35 wide from the wall, there are a few 40 cm light trough, the width of the outer baffle is generally about 8 cm, the light trough tolerance is 10 cm or 12 cm, it is generally determined according to the width of the entire ceiling, if the ceiling height is high, the high fork will be larger, and the height difference of the ceiling will be smaller.
It is made of gypsum as the main material, adding fibers, adhesives and modifiers, and is mixed and pressed and dried. It has the characteristics of fire prevention, sound insulation, heat insulation, light weight, high strength, small shrinkage, etc., and has good stability, no aging, and insect-proof, and can be constructed by nailing, sawing, planing, sticking and other methods. It is widely used in suspended ceilings, partition walls, interior walls, and veneers. >>>More
About 30 yuan, contracted labor and materials.
1. How thick is the gypsum board ceiling?
1. Different gypsum board ceiling shapes, thickness and weight are also different >>>More
Putty is generally enough once. The thickness cannot be calculated, less than millimeters.