How to check the waterproof construction of the kitchen and bathroom acceptance method

For the toilet waterproofing to meet the following five standards: no leakage, no water accumulation, no overflow, no water seepage, no conduction! >>>More

Newly made toilet waterproof lifting and leakage adoption. >>>More

Now to test the construction effect of waterproof coating, the most commonly used is to do a closed water test, the purpose of the closed water test is to check whether there is a leak in the waterproof construction, whether the waterproof function is normal, the following is the standard method of the closed water test: >>>More

For the parts that are prone to leakage such as pipe roots and water drops, evenly apply a layer of adhesive with a thickness of 1mm within 200mm of its center, then paste a layer of polyester fiber non-woven fabric, and then apply a layer of adhesive with a thickness of 1mm on the non-woven fabric. An additional layer at the wall flooding must extend into the reserved recess. 3. Lattice seam treatment, add a layer of 300mm wide coil on the lattice seam, paste it at a unilateral point, and lay a layer of 900mm wide reinforced additional layer on it. >>>More

First look at whether the construction is carefully checked if there are cracks and bubbles, whether the brushing is in place, press with your hands and feet, and feel whether it is reliable to step on it; Then look at whether there are wet marks at the root canal of the water storage wall; When draining, see if there is water accumulation, and then do follow-up construction under the condition of ensuring that there is no water accumulation; Changsha Yukang Waterproof provides professional solutions.