What should I do if I can t get water under the kitchen sink?

Summary. NaN method 1: boiling water is poured into the sink to solve the oil blockage, because the most blocked water is that the fat hangs on the pipe, the solution is to boil a pot of boiling water into the sink and then add some cold water to make the water temperature about 60-70 degrees, if the water heater and the kitchen are connected, it will be better solved, the hot water will continue to flush for 2-3 minutes in summer, and it will be longer in winter.

It is more troublesome to flush after it is completely blocked, and do not easily open the drain bend or dust accumulation cup, because the sealant gasket will leak if it is broken or installed poorly. Method 2: When the water puller absorbs loose debris to solve the blockage of the water tank, it is necessary to ensure that the lower mouth of the water puller is sealed by water, and the water has the effect of sealing the air.

At the same time, it cooperates with the water flow, and generally if there are many debris, you need to pull it out a few more times.

NaN method 1: boiling water is poured into the sink to solve the oil blockage, because the most blocked water is that the fat hangs on the pipe, the solution is to boil a pot of boiling water into the sink and then add some cold water to make the water temperature about 60-70 degrees, if the water heater and the kitchen are connected, it will be better solved, the hot water will continue to flush for 2-3 minutes in summer, and it will be longer in winter. It is more troublesome to flush after it is completely blocked, and do not easily open the drain bend or dust accumulation cup, because the sealant gasket will leak if it is broken or installed poorly.

Method 2: When the water puller absorbs loose debris to solve the blockage of the water tank, it is necessary to ensure that the lower mouth of the water puller is sealed by water, and the water has the effect of sealing the air. At the same time, it cooperates with the water flow, and generally if there are many debris, you need to pull it out a few more times.

Method 3: Steel wire through U-shaped sink to solve the sink blockage Generally, most of the places where the kitchen sewer pipe is blocked are U-shaped bends, if it is a sewer pipe with sewage screws, it is easy to do, and it is directly unscrewed, but it is best to pad a sewage basin at the bottom before treatment, so as not to stain the cabinet. If it has not been solved, you can remove all the sewer pipes, unscrew all the plastic connections, rinse them clean, remove the impurities inside and assemble them in turn.

If the above does not work, you can only find a professional to get it.

Kitchen sink clogged unclogging method.

Method 1: Fill boiling water into the sink to solve the oil blockage.

Because the most clogged water is that the fat hangs on the pipe, the solution is to boil a pot of boiling water and pour it into the sink and add some cold water to make the water temperature at about 60-70 degrees, if the water heater and the kitchen are connected, it will be better solved, and the hot water will continue to be flushed for 2-3 minutes in summer, and it will be longer in winter. It is more troublesome to flush after it is completely blocked, and do not easily open the drain bend or dust accumulation cup, because the sealant gasket will leak if it is broken or installed poorly.

Method 2: The water plucker sucks loose debris to solve the clogged sink.

When pulling the water puller, we must ensure that the lower mouth of the water puller is sealed by water, and the water has the effect of sealing the air, cover the drain port with the water puller, and press down to drain the air and water in the water puller, and then pull it up, if there is negative pressure, it will bring things out or loosen them. At the same time, it cooperates with the water flow, and generally if there are many debris, you need to pull it out a few more times.

Method 3: Wire through U-shaped sink to solve the sink blockage.

Generally, most of the places where the kitchen sewer pipe is blocked are U-shaped bends, if it is a sewer pipe with a sewage screw, it is easy to do, and it is easy to unscrew it directly, but it is best to put a sewage basin under the bottom before treatment, so as not to stain the cabinet. If it has not been solved, you can remove all the sewer pipes, unscrew all the plastic connections, rinse them clean, remove the impurities inside and assemble them in turn.

If it is a vertical sewer pipe, you can bend the front of the wire into a small hook, and then remove the drain and use the wire to hook out the impurities. If it has not been solved, first enlarge half a basin of water in the sink, then clump a rag into a ball, press the rag in the water with both hands on the sink drain, press up and down like artificial respiration, or use a leather puff to solve it.

If none of the above methods have been effective, it means that the kitchen sink is more seriously blocked, and it is best to ask a professional to solve it.

This may be because you didn't take care of the sink before, and a lot of residual garbage was left in it, which caused the blockage. You can take the outside of the sink out and use some hooks or something to get the dirt out inside.

Kitchen sink leakage, need to analyze the cause, of course, the cause of the problem may not be the only one, we should analyze the specific problem, according to different situations to repair. So what to do about a leaky kitchen sink, and what are the causes of a leaky kitchen sink? Let's take a look at it below, case one:

Sink outlet leakage If the reason for the sink leakage is the leakage of the sink outlet, it should be that the shaft gasket in the sink is damaged, and you just need to replace the shaft pad with one. Rotate the gland with pliers, remove it after it is loosened, and use a clamp to remove the ground shaft gasket and replace it with a new one.

Then it should be that the sewer is blocked, so it can't go down the water, so you can find something to open the sewer, so that the water can flow smoothly from the sink, if it can't stay for a long time, there may be a peculiar smell.

I think you have to find out the reason why the kitchen sink can't get water, maybe it's because you accidentally blocked it, you can try to get it open yourself, if it doesn't work, you can find some specialized people to help you.

You'll need to open your sink to see if there's anything stuck in the river, and if so, try to unclog it with some sticks, and if it doesn't, find a professional plumber to help you.

If this were me, I would probably call someone to fix it as soon as possible, after all, I can't get water under the kitchen sink, and I don't have the knowledge to do it alone.

For example, the sewer pipe of the vegetable washing basin (whether single or double sink) is designed with water seal and anti-odor function; There are pros and cons, and usually the water-sealed, deodor-proof (or U-shaped, or S-shaped) structure of the sewer pipe is prone to clogging.

Generally, it is blocked by garbage, usually pay more attention, if it is blocked, you can hook out the garbage with a steel wire. If that doesn't work, just change the pipe.

That may be the sewer blocked, you can ask the maintenance master to come over to help you dredge the sewer, if you dredge it yourself, it will be very troublesome, and it is dirty, generally my family will directly find the master to come over to dredge the sewer.

It's likely that the sewer is blocked, so you can use a long wire to get through the sewer, put the wire into the sewer, and gently poke it down, and slowly the sewer will be opened.

Find a wire with a diameter of millimeters, 3-4 meters long, fold it in half from the middle, and then twist it into a strand, and then bend the two heads in different directions on the side of the single end, and then stretch this end into the sewer pipe, grab the other end, and twist it in one direction while going inside.

Pour 1 cup of laundry detergent into the clogged drain, then 3 cups of hot water. If that doesn't clear the drain, pour 1 more cup of vinegar into it.

Mineral water bottles are used. First put half a pool of water in the pool, and then put the empty mineral water bottle upside down, the bottle mouth is aimed at the small hole of the pool drain and keep squeezing quickly, so that one can use the strong water flow from the bottle mouth to wash away the things blocked in the pool, and the other can suck the debris in the small hole of the pool into the bottle, and then quickly turn the bottle upside down and take it out, and then pour out the water, and repeat it several times to flush the dirt of the pool drain. It turned out that the sink in my kitchen was blocked not because of the vegetable leaves, but because of the tea leaves.

This method really works, you can try it. In addition, if the pool is blocked by some greasy swill, you can boil a pot of hot water and flush it at the drain to flush it away.

Check and confirm that the odor is unblocked. If there is a slight blockage, you can pour an appropriate amount of alkali into the sewer, which can have a certain effect on the removal of grease and rust in the sewer. If the sewer is not blocked but has a peculiar smell, you can use the principle of water sealing to fill a thin plastic bag with clean water, seal the mouth of the bag, and put it on the mouth of the sewer to cover it tightly, so as to seal the odor.

Steel wire through U-shaped sink to solve the sink blockage, for the U-shaped bend blockage, if it is a sewer pipe with sewage screws, it is not easy to do, directly unscrewed, after unscrewing, and then use the steel wire to pass both sides down, this method is very simple, if you can not solve the painting, you can remove all the sewer pipes, remove the debris inside, and then assemble it.

As we all know, a large part of the residue in the kitchen drain is limescale, so it can be used to heat the water with soda to react with it to unclog the drain. First, pour half a cup of baking soda down the drain and pour hot water on it, the soda reacts to remove the slimy stuff from the pipe.

The most common reason for the blockage of the pool is that the fat is clogged on the pipe, this solution only requires a pot of boiling water to pour into the sink, and then add some cold water to make the water temperature at about 60-70 degrees, if the water heater and the kitchen are connected, it is best to directly rinse the hot water for 3 minutes.