-
Anonymous users2024-01-241.If the hot water in the same neighborhood is the same as your home, then the water pressure of the tap water is low, 2If the water pressure is low in your house, it may be that the filter screen of your water inlet is blocked, or it may be that there is too much calcium carbonate (commonly known as scale) in the water pipe in the water heater and it is blocked.
3.When winter comes, the ability to produce hot water will be reduced accordingly. For example, (10 liters of water heater, refers to the temperature rise of 25 degrees to reach 10 liters, now the temperature of tap water in winter is generally 5-10 degrees, plus the temperature rise of 25 degrees, a total of only 30-35 degrees, such a temperature bath is definitely not enough, if heated to 42 degrees, then now 10 liters of water heater can not produce 10 liters of hungry hot water, can only produce about 8 liters.
There are three ways to solve the problem, 1If the pressure of the tap water is low, it is recommended that you add a booster pump, and a flow rate of 7 liters is enough.
2.If the water pressure is normal, then you should consider changing to a water heater with a large number of liters.
3.Directly change the electric water heater, so that your sprinkler head is so big, and the hot water will come out, but the hot water will be soon.
Finish. The 120-liter electric water heater heats up to 75 degrees Celsius and controls the outlet temperature at 40---42 degrees Celsius with 8 liters.
The water nozzle can only be washed for 30---35 minutes.
-
Anonymous users2024-01-23The newly installed water heater in my house today is also like this, anxious, how did you solve it?
-
Anonymous users2024-01-22You basically rule out the problem of the pipe in this situation, you can check your shower, it may be that the shower plate is blocked (the new one generally will not), and the switch itself is problematic, the inside is not passable (to check that you only have to change a shower to try) There is also an installation problem, if the raw material belt is not wrapped well during installation, it is easy to block the water pipe, you can remove it and check it.
-
Anonymous users2024-01-21Check the pipes of the water heater first to see if there is any water seepage, and also need to check the water heater inlet valve to see if there is a problem.
Kill them with pills.
Everything that was used before the fight was removed. >>>More
You are talking about the alcohol-based fuel formula, generally methanol 70-80%, water 20-30%, the number of additives is very small, the specific here is not clear, itself is a chemical, can not be added indiscriminately, the calorific value of kitchen fuel is generally more than 4,000, boiler fuel calorific value of about 8,000, this line of work for many years.
If you talk about the main flue, you can use the plate to do the encapsulation; If you talk about the bellows of the smoke machine, you can directly enter the flue. The windows of the bathroom should be made of aluminum alloy or aluminum-plastic material (good moisture resistance).
If it is only drainage, the above one is the usual practice, and the general drainage does not need to use a trap, only sewage is used, if it is connected to the sewage pipe, it must be connected to the trap.
The washing machine is best placed in the bathroom and balcony, you put the kitchen one is oily smoke, it is ugly and disgusting for a long time, and the other is by the head of the bed, and there is a sound of laundry when sleeping, which affects sleep.