-
Anonymous users2024-01-24Gerson Flooring Scientific Suggestion: The main reason for the large gap between the solid wood floors is that the board encounters too much water loss in an extremely dry environment, and the gap between the floor tenon and groove is directly caused by:
1) From the humid spring and summer to the drier autumn and winter, the continuous abnormal dry weather is just a large degree of moisture in the solid wood floor.
2) Direct sunlight exposure.
3) Open the air conditioner for a long time, the doors and windows are closed, and there is no humid air supplement.
4) The gap between the floors reserved before paving is larger, and the gap is more obvious in dry weather.
In case of extremely dry weather, take timely measures to moisturize the room. In daily life, the floor near the window sill should be avoided from being exposed to direct sunlight for a long time, and the air conditioner should be turned on for a long time, so pay attention to turning on the indoor humidifier at the same time. In case of separation joints between tenons and grooves caused by large gaps reserved for pavement, you can consider re-paving the solid wood floor.
I think Gerson flooring is better than nature's flooring, really
Now the imitation solid wood floor (in fact, it should be called laminate flooring), as long as it is a large company out of the goods, the quality is clear, as for the environmental protection data, you can ask the seller to test the report.
1. You must have never been to the manufacturer of Gerson flooring! The old factory is in tatters. It's just a lot of wooden planks, ready to be painted, no craftsmanship, and no equipment. >>>More
Solid wood flooring is not as easy to maintain as laminate flooring, you don't need to lay it all, such as toilets, kitchens, places that can touch water, these places are not necessary, Gerson oak solid wood flooring can only be said to be average!
In the manufacturing process of Fillinger parquet, according to the different climatic characteristics of the north and south, the moisture content of the floor is accurately controlled by advanced facilities such as Italian Aoshi vacuum drying kiln and large balance room, so that the floor is more suitable for the local climate and environment, and effectively prevents the floor from warping and cracking due to the difference in air humidity between the manufacturing environment and the use environment.