-
Anonymous users2024-01-24The height of the toilet outlet is generally about 25 cm, and if it is in the middle of the basin and the shower or a certain wall, it basically feels crowded to put anything.
In this case, you had better install a faucet, whether it is used or not, as a plug, if it is directly installed with a plug, it is easy to rust after a long time, if it is broken in it, not to mention how troublesome it is!
-
Anonymous users2024-01-23It can be fitted with a cloth pool, but it must have a sewer pipe.
-
Anonymous users2024-01-22Install a hose and wash the floor later.
1 All a wire "direct", a tee can be, an outer wire directly screwed to the water outlet, connect a tee, and then install a faucet and a rain faucet on each of the two water outlets of the tee (remember to wrap raw tape).
You mean that the water pipe is installed before the angle valve is installed, as long as it is flush with the wall, and you don't need to leave too much.
Hello! The best and most effective way to do this is to reinstall!
Yes, both the S bend and the P bend can store water, so that a water seal can be formed, and the odor will not enter the room through the pipe.
If it is a toilet, the water inlet of the water tank should not exceed 20cm high, if it is an ordinary squatting toilet water tank, it is about 45cm high, if it is a high-level hidden wall water tank, please ask professionals to install it, and the general control uses angle valve to control the water intake!