The house is decorated, and in general, the furniture should be brushed several times with clean wat

Here I can introduce you to a way: you see if you are convenient to make.

1: The production method of the industrial industry, soak or coat one side with a relatively oily solvent on the surface of the wood (imitation white water, propylene glycol methyl ether, n-dibutyl ether, etc.), when the moisture on the wood surface reaches 70%-50%, you can paint, so that the paint on the production is not easy to completely absorb, of course, it is best to choose wood-specific paints, nitro, acrylic, are wood-specific paints, some paints will also have alkyds, phenolics, but this kind of paint is more than previously said, The solvent used is a little more harmful substances, the main reason is that the solubility of the solvent, the better the solvent, the more harmful substances will be saved, I will not elaborate, 2: the surface of the use of nitro special wood paint, after making one side, and so dry on the side, the primer is required to be at least 2 sides or more, and then look at your needs to make patterns or colors, surface protection and other methods in the production of paint,

It depends on your requirements, if it is open, then it is good to have two bottoms and two sides, and if it is closed, it is at least three bottoms and two sides.

Of course, two primers and two topcoats.