-
Anonymous users2024-01-24The sealant used when installing the toilet is generally silicone glass glue. The curing time of glass glue increases with the thickness of the bond, for example, 12mm thick acid glass glue, it may take 3-4 days to set, but in about 24 hours, the outer layer of 3mm has cured. If the area where the glass glue is used is partially or completely sealed, the curing time is determined by the tightness of the seal.
In an absolutely confined place, it is possible to remain uncured forever. Therefore, the curing time of glass glue also depends on whether the air circulation is smooth.
-
Anonymous users2024-01-23Hello: In general, the surface will dry in about an hour. However, if the inside is really dry enough to seal and prevent leaks, it will take 1-2 days. Therefore, it is best to use the sealant after 2-3 days, otherwise it is easy to leak.
-
Anonymous users2024-01-2224 hours surface dry, 28 hours to reach the best strength.
-
Anonymous users2024-01-2124 hours is OK, or 18 hours if the weather is good.
Glass glue only plays a fixed role, in fact, if you only have one toilet at home, there is no problem if you have to use it, don't talk about urinating, but if you want to sit, you have to be lighter, as long as you don't move the toilet, there is no problem. In principle, it is necessary to wait for 24 hours for the glass glue to dry, and the glass glue can not be touched for cleaning within 24 hours.
It also depends on whether your toilet base and the floor are completely consistent, if it fits and the toilet outlet fits the PVC pipe on the floor and will not overflow to the floor due to drainage, it doesn't matter if you use it immediately. Of course, if you don't need it urgently, it's better to wait 24 hours. Sprinkle a little
- By looking and touching, JS is generally about 48 hours (or even 12 hours if the ventilation is good), but try not to step on it after JS is done, and a stone can be broken. According to the price of your material, polyurethane can be dried in one day by the national standard, and 5-10 days by non-standard.
The toilet can be used within 24-48 hours after gluing, and the specific time should be judged according to the type of glass glue used. >>>More
Generally, it has to be a day, find a corner and touch the surface with your hand to see if it is dry, and then press it slightly, if it is very elastic, it means that the inside is also dry, and you can use it.