-
Anonymous users2024-01-24When purchasing, the main attention is the following: 1. Judge whether the furniture is really made of solid wood, or indicate where it is solid wood and where it is wood-based panels. 2. Ordinary solid wood furniture is usually made of beech, white oak, ash, elm, catalpa, rubber wood, and oak, while the precious mahogany furniture is mainly made of "rosewood, wenge, and rosewood".
3. Pay special attention to the moisture content and origin of solid wood furniture wood. The moisture content of wood shall not be higher than 1% of the local equilibrium moisture content in the use area, otherwise the wood is easy to cause mortise and tenon separation, furniture falling apart, and warping due to large expansion and contraction. You should try to buy brand-name products from major manufacturers.
I suggest that you buy the top ten brands of solid wood furniture in 2014 on the top ten well-known brands, such as Huafeng Furniture, Federation, Nanyang Hu's, Qumei QM, Shuangye These brands are very good.
1. Moisture content of sports wood flooring.
The moisture content of sports wood flooring is the material characteristics of sports wood flooring is that the water content value directly affects the strength and volume of wood, and the moisture content of wood is the ratio of the weight of moisture contained in wood to the dry weight of wood, also known as moisture content. >>>More
The moisture and dryness control of the veneer is controlled by the dryer during processing! LZ: If you want to control the moisture content in the process, you can only control it by the heat press! "Veneer netting. China".
There are three forms of water contained in wood, one is the water that exists in the cell cavity and the intercellular space, that is, the water that exists in the capillaries, which is called free water. The second type is water that is absorbed by the cell wall, which is called adsorbed water. The third type is the water that makes up the tissue of the cells, known as chemical water.
Clause.
First, the moisture content of the wood is controlled at 8%-12%, which ensures the stability of the furniture and prolongs the service life. When the moisture content of wood is 8%-12%, the wood cells are fully dried and shrinked, and it is not easy to absorb moisture, expand, crack and deform, which increases the hardness of wood. This ensures the stability of the product, which in turn ensures the gluing strength of the wood and makes it durable. >>>More
1. All raw materials should be dried in a drying kiln and controlled at a moisture content of 8-10%.