How to remove urine scale in the toilet squat pit and thick dirt in the squat pit sewer?

Materials required: baking soda, white vinegar, brush.

1. First of all, sprinkle baking soda evenly on the dirty area of the squatting toilet. Baking soda has the effect of removing odors.

2. After that, pour in white vinegar, which has a corrosive effect and can remove stubborn stains.

3. Let stand for 5 minutes. So that the white vinegar and baking soda fully decompose the stains.

4. After that, use a brush to brush the dirt area several times.

5. After that, use clean water to rinse the squatting toilet.

6. In this way, the stains of the squatting pit and sewer can be removed.

Tools Raw materials.

Specialized descaler.

1. Take out the descaler and pour an appropriate amount of liquid directly into the stained part of the sewer or squatting pit;

2. After pouring in the descaler, wait for 30-50 minutes;

- At the end of 50 minutes, rinse the sewer pipe or squatting pit with an appropriate amount of warm water;

4. After the flushing is completed, the descaling of the sewer pipe has been thoroughly cleaned. (If there is severe dirt, repeat the above steps).

You can use the toilet cleaner to scrub the squatting pit, and the dirt in the sewer needs to be soaked before rinsing.

Ways to remove dirt:

1. Before going to bed at night, flush the toilet several times, flush it clean, and then use the injection syringe for injection, large, sold in pharmacies, about 1 yuan apiece, suck up the water in the toilet, you can use other equipment, as long as the water at the bottom of the toilet is sucked dry;

2. After blotting, stuff the toilet paper into the toilet, suck out the water in the thick dirt, the toilet paper is soaked, and then replace the dry one and continue to absorb until the toilet paper is no longer wet.

3. The above steps are to suck out the water in the scale, so that the toilet cleaner can fully penetrate into the interior to achieve the best and fastest descaling effect.

4. All kinds of brands of toilet cleaners bought in supermarkets can be used, the difference is that some are a little thicker, some are a little thinner, and some are different in color, it doesn't matter. Find a container like a water cup, pour out the toilet cleaner, mix it with water, and the ratio of water to toilet cleaner:

1 is OK, and it is OK to pour it directly without mixing with water. Until the toilet cleaner submerges the top edge of the limescale, it is estimated that it will flow down. The dosage is about half a bottle to one bottle of toilet cleaner.

5. Rinse it off again the next day and let the toilet cleaner melt in it overnight. When flushing, you will find that the water is no longer as clear as the color of toilet cleaner, and there is still a lot of powder at the bottom, so flush it several times. It will certainly not melt all at once, but the scale has melted and the surface is already very loose, so you can use it for a few days to rinse off the soft surface of the scale and then continue from step 1.

How to remove urine scale from water pipes.