How can a hardwood floor be like this, and why is it arched? Is there any way to do it?

Updated on Solid wood 2024-09-11
21 answers
  1. Anonymous users2024-01-24

    After the installation of the wooden floor, the arching phenomenon may be caused by the shrinkage joint is not enough or the cushion is damp, etc., then, the main reasons for the arching of the wooden floor are: the shrinkage joint is not enough, the cushion is damp, the blister arches, or a small amount of water left by the water dispenser, flower pots, small animals, etc. at home accumulates on the surface of the wooden floor for a long time.

    Second, the treatment of the arch of the wooden floor.

    1.In resurgence weather, the moisture content in the air is generally quite high. Therefore, we should not open windows for ventilation, but should close doors and windows, and turn on air conditioners or other dehumidification equipment when necessary to reduce moisture in the air;

    2.Households with installed geothermal systems should also always pay attention to whether the pipes below are cracked, and if the edge of the floor is found to be warped and damp, it should be dealt with immediately to avoid the development of floor arching. In the case of large-scale arching phenomenon, the floor should also be opened to check for leakage in time;

  2. Anonymous users2024-01-23

    Hello, the reason why the solid wood floor arches up is because the floor is often washed, and the ground is wet, it is recommended to buy a good quality estimate will not, it is so, I hope it can help you!

  3. Anonymous users2024-01-22

    The wooden floor will definitely arch up, that is, because the solid wood floor will be provided, if so, then you can only replace this piece.

  4. Anonymous users2024-01-21

    If it is arched, it may be caused by moisture, or it may be due to uneven ground in the process of breaking, or due to other reasons, if it is caused by moisture, this should strengthen ventilation, do not let it be damp to recover.

  5. Anonymous users2024-01-20

    Solid wood flooring will be deformed when it rains in the summer, and it will be slowly supplied, which is a normal phenomenon. In winter, when you encounter geothermal heat, it will slowly return to its original state.

  6. Anonymous users2024-01-19

    If the solid wood floor is not pasted, it will be like this when it encounters weather problems, such as thermal expansion and cold contraction. If you arch it, you can find a professional to re-apply it.

  7. Anonymous users2024-01-18

    The quality of the solid wood floor is still very good, and the reason why it is arched is because of the exposure to the sun, because the solid wood floor must be maintained, otherwise it is easy to deform and coax.

  8. Anonymous users2024-01-17

    If there is such an air condition on the floor, it may be that the floor will bulge due to thermal expansion and contraction underneath, and you should reassemble the floor.

  9. Anonymous users2024-01-16

    This is because there are no gaps left in the hardwood floor, which is due to the change in the weather, which causes the hardwood floor to expand. That's why it's arched, and generally it needs to be re-laid.

  10. Anonymous users2024-01-15

    This must be that it was not paved according to the standard when it was laid, and when the weather was hot, the heat expanded and contracted, and it began to bulge.

  11. Anonymous users2024-01-14

    I think that most of the phenomena on the floor of your home are caused by improper installation, or it may be the thermal expansion and contraction of the floor, so it will bulge, and you can find a maintenance master to help you repair it.

  12. Anonymous users2024-01-13

    There are two reasons for the solid wood floor arch, one is that the water has entered, it has been demerited, and the other is the thermal expansion.

  13. Anonymous users2024-01-12

    How can a hardwood floor be like this, and why is it arched? Is there any way to do it?

    Wooden flooring, if the quality is not up to par, in case of moisture, heat will arch up, as long as the tide of the place with a hair dryer or something to dry it, the tide recedes, naturally good.

  14. Anonymous users2024-01-11

    It may be that the floor is not well installed and does not leave enough telescopic gaps. It could also be due to excessive swelling caused by the damp ground.

  15. Anonymous users2024-01-10

    Hello, the later maintenance of solid wood flooring is more troublesome. Because the glue will last a long time, it will lose its effect. You have to ask a special master to handle it.

  16. Anonymous users2024-01-09

    Solid wood flooring is strong and durable, warm in winter, is a good choice, arched up because soaked in water, the skin and wood inside will be arched or hollow, so pay attention to maintenance and use.

  17. Anonymous users2024-01-08

    Generally, people who have laid solid wood floors, the second time is very likely to storm those synthetic ones that will be flattened for 10,000 yuan, and this is how they are damp, and then it is easy to lose weight and get hot.

  18. Anonymous users2024-01-07

    The solid wood floor is arched, probably damp, and it should be too humid underneath.

  19. Anonymous users2024-01-06

    Solid wood flooring is generally made of empty walls, and this kind of floor is noisy and the only defect.

    If it is not arched, it should be used indoors or in the master bedroom, and there should be no high temperature, so it may not be arched.

  20. Anonymous users2024-01-05

    If the wooden floor arches, it is uneven. The floor can only be rebuilt.

  21. Anonymous users2024-01-04

    Pay attention to leave it blank when sticking to the floor, because the weather is hot and hot and expands and contracts coldly, because this situation occurs after the thermal expansion.

Related questions
2 answers2024-09-11

There is no pull seam, caused by thermal expansion and cold contraction.

1 answers2024-09-11

Generally, if the expansion joint is not reserved enough, remove the baseboard, saw off the floor of the top wall, and reset the baseboard.

2 answers2024-09-11

Hello dear, the sound of the floor is because the gap is not left when paving, simply put, the master did not help you pave or the master is not professional enough, the sound of the floor is one of the most difficult things to solve. The best solution is to tear down and resurface.

2 answers2024-09-11

It shows that there was no gap during the installation at that time, which led to the expansion and contraction of heat and cold contraction.

1 answers2024-09-11

What is the arching of wooden floors?

The phenomenon that the local area of the wooden floor arches upwards and appears to be separated from the base layer and hangs, which is called floor arching. >>>More