-
Anonymous users2024-01-24Vinegar descaling.
Pour the mixture of vinegar and water into the toilet bowl and soak it for half a day, and the dirt will be wiped off.
After scrubbing the toilet, spray the white vinegar on the inside of the toilet, keep it for a few hours, and then flush it with water, which can have the effect of disinfection and deodorization.
Baking soda descaling.
Sprinkle 1 2 cups of baking soda in the toilet bowl and brew it with hot boiled water for half an hour to remove lighter dirt.
Clean the toilet bowl frequently with baking soda before it has stubborn yellow rust spots. Sprinkle baking soda on the inside of the toilet bowl for 10 minutes, then wash it with a toilet brush.
If stubborn stains have formed, they can be used with vinegar solution, soaked thoroughly and cleaned with a brush. The outside base of the toilet, which is easy to overlook, can also be cleaned in the same way and then dried with a cloth.
-
Anonymous users2024-01-23Urine stains are alkaline and are most effective with strong acid cleaners.
The cleaning method steps are as follows.
1. Use toilet cleaners. Toilet Cleaner is a cleaner specially produced to eliminate dirt in the toilet urinal and works very well. Sprinkle toilet cleaner around the toilet wall, leave it alone, and after an hour or two, brush it with a brush and flush it, and it will generally be clean. >>>More
Pour a little 84 disinfectant, and after a while, it will be as clean as ever with a brush.
Buy a bottle of "toilet clean", when you don't use the toilet for a long time (such as: when you don't use it at work or sleeping at night), pour it evenly on the inside of the toilet bowl, and squeeze a little water into it (see how many stains are appropriately increased or decreased), don't brush, soak, the longer the better. Then use a brush to brush, there is no need to exert force, once it is not completely clean, and after two or three times, the dirty toilet will be the same as new.
Flush the toilet bowl with urine stains first, and it is best to wait for a while for the toilet to dry a little. >>>More
The yellowing of the outside of the toilet refers to the gap between the toilet shell or the toilet base and the ground, if the toilet shell is yellow, this can be removed with toilet cleaner; If the gap between the toilet base and the ground is yellow, because this gap is generally made of adhesive glue, this means that the adhesive may be too long to fail, with the phenomenon of local water seepage, this needs to remove the toilet, clean up the stains in the base, and then re-install the toilet, and lay the adhesive (you can't use the toilet for at least 24 hours after gluing).