-
Anonymous users2024-01-24To use a professional punching drill bit, not a percussion drill bit, the choice of power is second, as follows:
It is best to use a special drill bit for tile drilling on the tile wall, do not directly use the impact drill bit electric hammer to punch the hole, so that you can 100% avoid the tile being cracked, you may see others are directly punched with an electric hammer, and the tile is not cracked, the important reason is that the tile is not hollow at the location of the punch; The sound of hand knocking on the tile can judge whether the tile is hollow, if there is a hollow drum or can not judge whether it is empty, be sure to use a special drill bit for ceramic tiles to punch holes.
-
Anonymous users2024-01-23500W, 750W can be, you need to use a percussion drill, but you should be careful when drilling on the tiles to prevent damage to the tiles.
-
Anonymous users2024-01-22It's all right, it's mainly a technical problem, play slowly, and if you play fast, it will crack. Try not to hit the corners of the tiles, in case the corners are empty and crack.
they keep in their bedroo
I suggest that the bathroom is best tiled, so that there will be no such troubles as you said, and there will be no second construction.
Personally, if you don't think it's safe, you can add a post between the water heater and the ground to reduce the force on the wall.
Use a hammer percussion drill bit.
Percussion drills or hammer percussion drills rely on rotation and percussion to work. A single impact is very slight, but a frequency of more than 40,000 pounds per minute produces a continuous force. Can be used on natural stone or concrete. >>>More
The cement slag should be wiped off as soon as possible after pasting, this time it is very easy, and the later time can only be sprayed with more water and wiped with a rag.